Hi Team Gurux,

First of all we would like to thank for your great effort to provide Gurux library.
We have successfully read Holley meter DTSD545 via serial port. Now we want to read same meter via tcp remotely, but little bit confused how we will identify the meter on the server i.e meter serial number.

Our meter is online and can provide server detail if you need.

Will appreciate your prompt response,

Regards,
Sohail

Hello everyone
I am a new member and i have some questions , these days i will download dlms director , i am interested to format the meter or calibrate it or write new records , can i do this with dlms director??
I bought used meters and i want install them on my customers pv field , but before the installation i want to check them if everything is ok

When a GXDLMSDirector device is set to GMAC authentication mode the password box is enabled, and connections won't work unless something is entered in that password box. It doesn't seem to matter what you put in the password box, as long as you don't leave it blank. Is this a bug, or is this password used for something I have missed?

Hi,

I need to read a HPL Single Phase meter using DLMSDirector. But this manufacturer is not listed. How can I configure the meter to read values?

Please help me.

Regards,

Manojit Pati

Hi,

Tried to connect the Agnitio net meter via GuruXDirector (Low and High) password, got error message - Connection is permanently rejected, Authentication failure.

Tried with Kalkitech: able to communicate with meter successfully

Checked with meter vendor stating the issue got a reply as below,
IS 15959 (Part 2) - Advanced Security Profile is implemented in meter

GuruX supports this advanced security profile encryption?

Thanks

Failed to receive answer from the modem. Check serial port.
Hi,
I am using GXDLMSdirector and this is the log

Do you know the problem

Hello,
I'm trying to connect to a meter ITron Gallus Net G4
https://www1.itron.com/local/Italy%20Product%20Portfolio/GA-GALLUSNET-0…
, compatible with DLMS/COSEM protocol.
I'm using a serial connection, but I'm not sure which is the correct DLMS configuration, because the meter is not into the device list. Could you please help to set correct parameter for it?
thank you

Dear GuruX;
Hello, I am Hasha, From Mongolia. First of all, Thanks for this great project. I have to read Holley DTSD545 data via DLMS and I have faced problem. Please help me for this. Also, I attached error pic and log pic.
thank you :)

Cannot connect to EMH LZQJ-XC.
Beneath the logfile.