Can you tell me what the device- and the secured connection settings are for Kamstrup 162JxC with serialnumber 15162766.
The connection will be established by optical head.

Baudrate
Authentication
Client Address
Physical Server
Logical Server

Serial Port Settings

Used secure level
System title
Block cipher key
Authentication key
Invocation Counter

I have the Master Encryption Key.

Hello.
I have a Elster A1500 Meter with Serial Number 00391068
But I dont know Meter's Physical address, and I must connect via RS485 over transparent modem.
Modem IP is 192.168.2.250 and port 10001.
I'm connection Actaris/Itron modem very well wtih this configuration
Serial Number: 73032578
Physical address: 2578
Comm Options {
BaudRate: 9600,
Data Bits: 8,
Stop Bits: 1,
Parity: None,
}
Gurux Config : http://oi67.tinypic.com/11i382c.jpg

Hi

I'm trying to read an E450 Meter from Landys+Gyr with the GXDLMSDirector Version 8.0.1704.070.
I can read the meter with MAP110 so the serial settings and the used password should be correct.
For GXDLMSDirector i used the following settings:

Manufacturer: Landis+Gyr
Start Protocol: DLMS
Media: Serial
Authentication: Low
Password: (the one working with Map110)
Client Address: 11

When i try to connect i get this error:
Insufficient memory to continue the execution of the program.

This is the log:

In GXDLSMDirector, if I choose Tools->Manufacturers->[some maker]->edit, the Addressing Authentication selection box only shows the subset of authentication types the manufacturer supports. There doesn't seem to be a way to add a new authentication type to a manufacturer through the GUI. I have to exit its XML file, and add the new authentication type there.

Once the new authentication type is added in the XML, it can be configured through the GUI

Hi Mikko

I am trying to read Hexing meter i have added the manufacture and i can successfully connect to the meter.

However im getting error getObjects failed access error device reports a unavailable when i try to read

Please see logs below

Hi sir, for Manufacture = Indian Standard, HLS(2)=AES128
if client challenge = 1234567890ABCDEF, KEY = HHHHHHHHHHHHHHHH
1.which item we should input the KEY? Block Cipher Key or Authentication Key
2.which item we should input the service challenge?
3.the app should send packet for f(CtoS) as below
7E A0 2B 03 61 32 8D EB E6 E6 00 C3 01 C1 00 0F 00 00 28 00 00 FF 01 01 09 10 E9 15 92 8B E1
2B 36 F6 3E 97 CA C4 C2 0A 18 70 08 7B 7E
but we get
7e a0 2c 03 61 32 ac bc e6 e6 00 c3 01 c1 00 0f 00 00 28 00 00 ff 01 01 09 11 10 00 00 00 00 10

Hi,
I'm developing a smart meter, and referencing this open source code.
I've tested this code with parameters of 9.2.4.8.4 example in Green Book 7 as following:

System Title : 4D4D4D0000BC614E
Frame Counter : 01234567
Initialization Vector : 4D4D4D0000BC614E01234567
Block cipher key (global) : 000102030405060708090A0B0C0D0E0F
Authentication Key : D0D1D2D3D4D5D6D7D8D9DADBDCDDDEDF
Security control : 10
CtoS : 4B35366956616759 (“K56iVagY”)
StoC : 503677524A323146 (“P6wRJ21F”)

Hi,sir:
In HLS mode ,DLMSDirector could add a inputbox to write Client Chanllenge like 1234567890ABCDEF?
At present,the Chanllenge is a random number.
thank you!

Sir,
When i try to 'Read' objects in DLMSDirector , i got the following error - " System.Exception: GetObjects failed. Invalid Block number. It is 131074 and it should be 65538". please help me to solve this issue.

Hi

how can i , please, modify some service in conformance supported service, it seems that this can not be writable :