Hi.

I can connect Sanxing DCU from GXDLMSDirector with these settings in screenshot.
However i cannot read object list. It throws "GetObjects failed. Access Error : Device reports Read-Write denied" error (Error is also in screenshot).
Is there any other ways to read object list of that device or am i missing something.

Thanks for help.

Hello

I'm trying to connect to my EDMI MK7MI using RS-232

but it always give me invalid wirelessMbus frame response and cannot connect to the meter, i'll attach the following response from notification side on DLMSDirector

31/03/2022 15:02:08
<WirelessMBus len="17" >
<TargetAddress Value="44" />
<SourceAddress Value="33" />
<PDU>
<Data="334433443344" />
</PDU>
</WirelessMBus>

Invalid WirelessMBus

Thank you.

Hi
I trust every body is well, I first want to understand DLMS before I go to Arduino IDE platform. So I have downloaded GXDLMSDirector and I want to setup it for serial coms and to talk to Kamstrup meter. I can add a Device, selected kamstrup as manufacturer. I can connect successfully with the default setting but when I want to read it the meter does not respond. The authentication key and encription key are blank as default. What setting am I missing?
Regards Gerdus

I'm trying to connect multiple meter by RS485 and read data but don't know how to read them one by one
I think I need to identify by Device ID
But don't know how to do?

Hi Mikko,

We are building an automatic testing software for our meters that will run various testing scripts on the production line. Is there a way in which we could integrate the functionalities of the DLMS director into one of our testing scripts and connect to our meters over DLMS using serial port? We need to read the OBIS code values and run scripts on the meter. We are not sure about the platform for running the automatic testing software yet. It could be Linux as well as Windows.

Regards
Sidharth

Hi, I am unable to communicate with the HEX110 through the optical port. I receive and error message, I appreciate a lot if you can help me with the problem (Is a parameter error? ) .
Thanks and regards
Alejandro

Hi,
I've managed to connect to the meter on the optical interface but I cannot do the same connection on the RS232 interface. Would someone managed to do this connection and can help me with information about settings, cable pinout, etc?

Thank you,

Arian

Hi,

just using a python script to access the Kaifa MA309 smartmeter using a serial RJ12 cable with an FT232 USB device on an armbian using python 3.7

Hi Mikko,

could you please tell me why I can not set the clock time or the timezone?

Meter Type:
Landis & Gyr E450 DLMS Idis
Authentication is LOW level.

Am I doing something wrong?

Thank you and best regards,
Manuel

Hello,
I am new with DLMS.Any help would be great !!
I am trying to read data from L&T smart meter(Manufactured by:Schneider Electric india pvt ltd)) using optical cable.
I get response for SNRM Frame, but there is error response in AARE when i send the AARQ Frame.
The password is correct,i have been ensured by the manufacturer as well as the list of default password as documented by gurux.