The current DLMS.Net and GXDLMSDirector project files are set up for .Net 3.5. Recent versions of Mono no longer support this. Are there any known problems if the configuration is changed to use .Net 4.5?

When i Sent "7E A0 ..." command, Director still sent Get next frame..
How can I solve this problem?

This is my log :

Good Morning ,

I installed on my computer the Gurux DLMS Director.
I want to work with maestro modem M100 2G

When I read gave this error: IMAGE

manufacturer Actaris Electricity
start protocol DLMS
media TERMINAL
authentication NONE
wait time 7
address type default
pysical server 1
logical name referencing YES
client address 1
logical server 1
phone number : 927232602

I send SMS via at commands to the modem.

What is wrong?

I'm new at this. I need your help... please

I am using DLMSDirector 8.0.0.12. If I try to create a new manufacturer, using the Manufacturer Settings dialogue box, I find some problems with the Authentication handling:

If I select HighSHA1 the Advanced button is enabled, and I can enter a secret in the dialogue box it brings up. However, this secret does not seem to be used or needed. Should the Advanced button be enabled for SHA1 authentication?

HI I have meter Itron SL7000 type SL761X071

I can connect through application ACE pilot on settings
HDLC tunneling by tcp
Use boadcast physical address
and i set address ip and tcp port

when I want connect through GXDLMSDirector i set

manufacturer Actaris Electricity
start protocol DLMS
authentication LOW
password ABCDEFGH
wait time 5
address type default
pgysical server 11
media net
logical name referencing YES
client address 1
logical server 1

and ofcourse ip address and tcp port

when I return AARE to client, clinet sent "disconnect request" to Server.
why, how do I fix this problem?

my log
06:47:57 Parsing AARE reply<CR><LF>61 29 A1 09 06 07 60 85 74 05 08 01 01 A2 03 02 01 00 A3 05 A1 03 02 01 00 BE 10 04 0E 08 00 06 5F 1F 04 00 00 10 10 00 64 00 07
06:47:58 Disconnect request
7E A0 07 03 21 53 03 C7 7E

I use Mode E protocal.
In physical.req/ind Stage, I finish handshark and enter HDLC Stage.
When I receive SNRM command, and I return RA Command.
But director show "System.IO.IOException: 裝置無法辨識命令。"

how do I trace the client.GetData(p.Reply, reply)) function to find my bug?

I use director to verify Mode E.

my device properties as att. file,
(start protocal : IEC / name : pro / manufacturer : iskraemeco / serial mode )

when i press connect, director will be sent /?! by uart_tx.

my meter sent "/pro2isk000654321" to director, but director will be stop and show " B0 " and " Failed to receive reply device "

I dont know some thing wrong. can i read more detial error message?

Hi

I have some strange problem,
I need to read registry 1.8 and 2.8 on demand and profile where is storage data of this registry 1.0.99.1.0.255

when I read registry I have values like this:
1.8
7,75314797773613E+17
-3,09988391851445E+17
-2,66753835428689E+17
-1,51461684968004E+17
-2,89637751035265E+16
8,63565228548293E+16
2,08854432719307E+17
3,31352342583784E+17
4,46644493044469E+17
5,69142402908946E+17
6,91640312773424E+17

Hi,

Can I read an Elgama EMS meter using protocol IEC 62056 ?
Because I am trying to connect with DLMSDirector but it does not work.
Do you have any solution for that?
Thank you very much!