Forum Rules

Before commenting read Forum rules

Don't comment the topic if you have a new question.

You can create a new topic selecting correct category from Gurux Forum and then create a new topic selecting "New Topic" from the top left.

Description

Questions and comments about DLMSDirector.

Image
By fahrur , 20 May, 2016

Actaris SL761A071 : Failed to receive reply from the device in given time

Forums
DLMSDirector

Dear Gurux

i have Actaris SL761A071, and using default intial setting with low authentication :

GXDLMSDirector Version :8.0.0.20 (Running at Windows 10 64bit)

Manufacturer: Actaris Electricity
Media : Serial
Auth : Low
Logical Name referencing : Checked
Password : ABCDEFGH
Wait Time:20
Client Addr:1
Physical Server:11
Logical Server:1
Port Name:Com8
BaudRate:9600
Data Bits:8
Parity:None
Stop Bits:1

By defcon , 11 May, 2016

No response for EMH DMTZ-XC

Forums
DLMSDirector

Hi

I am trying to connect the DMTZ-XC from EMH via LAN RJ45.
After sending the SNRM I get no reply and Director runs in a timeout.

Manufacturer Settings:
Use LN: no
User IEC 62056-47: no
Interactivity Mode: KeepAlive (interval 40, no force)
Start Protocol: DLMS
Authentication: None
Client Address: 10
Server Address Type: SerialNumber Formula: SN%10000+256
Physical: 1 Logical: 0

By prasanna_18 , 4 May, 2016

Problem in installing gurux dlms client

Forums
DLMSDirector

I am trying to install GURUX GXDLMS Director version 7.0.40.1. After installing it whenever i go for tools/manufacturers it gives me the exception . The screenshot of the exception is attached .

By coppice , 29 April, 2016

Strange behaviour in SNRM messages

Forums
DLMSDirector

If I change the physical and logical server IDs I find the with some settings DLMSDirector sends the blocks of window and maximum message lengths, and with some settings it doesn't. An example is with physical server set to 1 and Logical server set to 0 I get:
7E A0 07 03 21 93 0F 01 7E
but if I change physical server set to 0x100 and Logical server set to 1 I get:
7E A0 17 00 02 04 01 21 93 F1 2E 81 80 08 05 02 00 80 06 02 00 80 F8 85 7E
Surely the information should be sent whatever the addresses are set to?

By dafeng0908 , 25 April, 2016

Write Command fail

Forums
DLMSDirector

I finish Object Collection.
But I try to write new date to Clock Object.
Director don't sent any comm to Server.

By d21d3q , 20 April, 2016

Error while reading whole Load profile

Forums
DLMSDirector

I am reading Landis E650 with optical head (serial port).
I managed to dear all supported Obis codes. Now I am trying to read whole (read all) Load profile but I am getting error:
system.argumentexception value does not fall within the expected range
Here is my log file: http://pastebin.com/HAy8srj4
error occurs in line 4293, ("wiersz" means row)

By coppice , 14 April, 2016

IPv6 and UDP support

Forums
DLMSDirector

If I use DLMSDirector 8.0.0.16 to connect to a meter using an IPv4 or IPv6 address by TCP my meter gets a connection, and I can communicate OK. If I try to connect to a meter using an IPv4 address by UDP, DLMSDIrector sends to the meter OK. However, if I try to connect to a meter using an IPv6 address by UDP, I get an error box saying "An address incompatible with the requested protocol was used bbbb::102:4059. I specified the address as "[bbbb::102]" in the dialogue box.

DLMSDirector