Hi

When trying to connecte Secure meter (premium 300) (indian manufacturer) in HIGH authentication we are getting the following error.

Error : ServiceError Write Exception: Service unsupported.

Gurux GXDLMSDirector: 8.0.1708.1801

Manufacture settings:

Hello!

I try to connect Gurux GXDLMSDirector with a Kamstrup Omnipower Three-Phase meter. But I always get the error message "not enough data".

Hello Sir,

I want to read Secure i-credit 350 meter. I am trying since 15 days and i established connection but, i am not able to read voltage and current.

As i am using DLMS Protocol, i found in one post and you suggest there to refresh device after connection, it will automatically read supported OBIS Code from meter. but, in my case it is not working.

i attachedDLMS connection JPEG file. Kindly Reply me.

i used only one OBIS Code and that is Data-0.0.42.0.0.255

Manufacture settings:

issue in reading secure premier 300 meter

Hi

We have a issue in reading Secure meter (model: premier 300).

Gurux GXDLMSDirector: 8.0.1708.1801

Manufacture settings:

Flag ID:EHL
Name: Secure meter
Using logical name referencing: checked
keepinterval: 40
start protocol: DLMS
Addressing:
authenticatoin:none
client address
address(hex):10
server address
address type:Default
serial number formula
physical:1
logical:0

Device properties:

Hi,
I m trying to connect to my Landis+Gyr E250 DLMS meter with DLMS director with following settings but getting error

When I Trying Connect to Elster A1500 I'm getting

"Manufacturer type does not match. Manufacturer is ABB and it should be ELE." Error

Here Is My Configuraton

https://image.ibb.co/mBpXFQ/Screenshot_2017_07_28_11_48_40.png

Hello Sir,

I am communicating Landis-Gyr E550 with DLMSDirector. The problem is breaks in connectivity. When first connects, I can read data again and again, but as I disconnect I am unable to connect again. Then I exit DLMSDirector, open new file, add device and then after few attempts it connects. In simpler words, sometimes it connects and sometimes not.
Please guide me where I am making mistake. Thanks in advance.

Regards
Jack

Hi,

Hi,
I try to get data from Actaris Electricity Meter, but it can't be continous.
After I got a success reply, then it always reply with unknown error.
I connected the meter using serial port.

Good day

I'm connecting to a L&G E650 via Serial-USB-Optical. Able to read back all info once, after that I can't reconnect. Getting Error "Invalid Response", no settings changed. Sometimes after rebooting Meter, I can connect again, but then also only once.

Here is Log data:
https://pastebin.com/DbYEvweU

Attached Setup as Logo.
Any advice will be appreciated.

Blessings
Herman