In Gurux Director Software, I have read all Load Survey Data from Meter and Store in my file, then I read data by date range, but When I get data by date range, their parameter values are different, and on comprasion with all data, it seems to be data is shifted by 11 days, means when I read data for 30-12-2018, I am getting readings of 10-1-2019, But datetime in data is of 30-12-2018.

So, I didn't get what's wrong in this.

I have attached screenshots but due to pixel limitation, Image is not properly visible.

As per my understanding, DLMS simulator can replace with real physical meter ?
And we can simulate the data from the meter using XML format.

Hi, I am having problems reading the Load Profile in the meter ION8650 with Gurux Director. I can read the clock value, the association logical name, and other available registers but when I'm going to read the load profile it appears to be a connection error (the Gurux Director saids that the meter is not responding).

Do you have any idea of what is going on?

Thank you!

Hi Mikko,

Im Using guruxDLMSdirector Version 8.1.2109.3001, i have tried to connect to a meter which is connected by a gateway in Utitlity settings so i set the network ID and Physical device address. these are the logs of the connections:-

Hi,

How do i edit data index for push objects. When i click edit button i see only option for Target OBIS and attribute index in prompt.

thanks you,

HI. I have tried to take the values for the 1.0.9.6.0.255 and 1.0.10.6.0.255 under register. This communication in done using high authentication. But cannot obtain the result. While other required parameters such as energy can obtain.

thanks

Hi,
I new to this forum. So if miss something please correct me.

I have a secure premier 300 meter which supports DLMS protocol. I am trying to connect with meter using USB to RS232 cable. But I am getting no response.

The meter serial number is X1714625

The connection details is attached.

I think there's a bug in the GXDLMSDirector when reading the Scaler value in Register Object:
With the same meter the GXDLMSDirector shows Scaler value 1 and through dotNet code it shows Scaler value 100 (this is correct value for this meter).

Hi, I'm using DLMSdirector to try to read out (initially at least) from a Data Protection Object (Class_ID = 30). but the object does not seem to appear in the object list, and the IC does not appear in the tree view - I do get "Error - device reports an undefined object".
I'm wondering if anyone has had success in reading a Data Protection Object?

Thanks!

Hello,

I got some errors when I was trying to read the DLMS meter with "GXDLMSDirector".

Please suggest solutions.