Hello, I have successfully took readings l&T dlms meter which only needs the password. Now I am trying to connect to Aurora L&T smart meter using GXDLMSDirector application with authentication key and password which got from the manufacturer, but it throws error "frame is not fully received".

Settings :
Manufacturer: India standard
Interface : HDLC
Authentication : MR
password: ****
Client Address : 0x20

Hi, can you please give me the serial port settings of Landis+Gyr E570 serie2

Hi, this is the only place I have found with lots of infos on smart meters so I thought someone here may be able to help.
I attempted to connect DLMSDirector to my smart meter E570 Landis+Gyr S2 with my optical probe (it's an ordinary optical probe IEC1107 not Aip200 Landis+Gyr optical probe) but the DLMSDirector keeps failing.
So I have two questions :

1) It is necessary to use Aip200 Landis+Gyr optical probe to connect with smart meter Landis+Gyr E570 Or my ordinary optical probe IEC1107 can do the job?

Hi

I began executing conformance test in my "meter simulator" and something strange happened. It is at "Initialize tests" in "HDLC Conformance Tests".

Please, see log below:

When I try to connect Gurux with smart energy meter, initially it connect. But when i disconnect and try to connect again it won't connect.

In order to reconnect again either i need to restart the meter or gurux.

I'm using both gprs and optical for connection, issue found in both.

I am reaching out for guidance regarding my recent endeavor to establish communication with a DLMS smart meter using Holley meters. As someone new to this domain, I am currently navigating the initial setup phase and encountering some difficulties.

I can use the ECDSA suite1 and One-Pass Diffie-Hellman connect to the meter. But when I read the data from the objects,it shows "Object reference not set to an instance of the object. "
And I try to change the key agreement from one-pass to none，then I can read the data successfully. So Why does this error occur？

The log is below:

Hi, I am trying to read load profiles for a Sanxing meter. Could you please take a look at the flow and expand why I am getting an invalid data type at the end of this?

Thanks

I select "Certificates tab from the "Security setup" object. Then press "Key pair". The error is “access error Device reports a inconsistent Class or object ”.

The server log ie below:
Server address: 1
Associations:
[0.0.40.0.0.255]
0.0.40.0.0.255 Ch. 0 Association #1
0
++++++++++++++++++++++++++++
Client address: 1
Conformance:
[SET, GET, ACTION]
MaxReceivePduSize: 832 MaxSendPduSize: 65535

Hi
I tried using Simulator（Java） as the meter，then i use the Director to read the meter。When I connet to the meter without Authentication，it works successfully。But I use the HighGMac，there are some issues here。Show that LLC bytes are missing from the message。

the sever log is below：
Client address: 1 HighGMac authentication, Client address: 1, password:
Conformance:
[GET]
MaxReceivePduSize: 832 MaxSendPduSize: 65535