Hi there.

I'm new to the DLMS world and currently using this wonderful tools to help with meter development.

I just don't know for these two frames, why the len field in the parsed xml doesn't match the actual frame
e.g.
* First frame's len is 0x0A but in XML it is "C"
* 2nd frame's len is 0x23 but in XML it is "22"

Could anyone help to explain this?

Thx!

Good day developers and communities,

I have project to connect meter EMH LZQJ-XC with Gurux GXDLMS director using serial interface. The information for this meter is very limited in the web. Please help me to configure this meter as my deadline for this project is near. I already try the default setting for the EMH meter but it failed.

Hello Mikko,
I have implemented object with Proprietary attributes (Blue Book:„Proprietary attributes may be added: these shall be identified with negative numbers.“).
This is a part of packet with Object List (when perform Refresh in Director):
"
...60100010102020F01160002041200011100090600005E2735FF0202010702030F
0116040002030F /* attr 01, access 04 auth.read */
0216060002030F /* attr 02, access 06 auth.read/write */
FF16000002030F /* attr -1, access 0 no access */
FE16000002030F /* attr -2, access 0 no access */

i could not see in the data tab even receive it as in log. here is my log:
10:29:44 Read object type ProfileGeneric index: 4
TX: 7E A0 19 03 03 52 EA AB E6 E6 00 C0 01 C1 00 07 01 00 63 01 00 FF 04 00 84 DD 7E
10:29:44
RX: 7E A0 15 03 03 54 E8 59 E6 E7 00 C4 01 C1 00 06 00 00 00 B4 D2 EB 7E
10:29:44 Read object type ProfileGeneric index: 5
TX: 7E A0 19 03 03 74 DE EF E6 E6 00 C0 01 C1 00 07 01 00 63 01 00 FF 05 00 5C C4 7E
10:29:44
RX: 7E A0 12 03 03 76 D9 0C E6 E7 00 C4 01 C1 00 16 01 9A 11 7E

Hi,

I'm having some trouble reading my Itron/Actaris SL7000 meter. its a 2021 meter of type SL761.

I can connect to the meter using DLMSDirector with no authentication. But I want to read some of the energy values, as well as the clock and serial number. I can read this for a Landis+gyr meter using a java application with the GuruX library and want to be able to read the SL7000 the same way.

Hi, Mr Kurumi.
I try to connect to Inhemeter meter, but I got this message:
ServiceError Initiate Error exception. Initiate IncompatibleConformance.
GXDLMSDirector 9.0.2302.2001
Log created 15:46:22
15:46:31 Initializing serial connection.
15:46:32 IEC Sending:/?!<CR><LF>
15:46:42 Failed to receive reply from the device in given time.
15:46:43 HDLC received: /IHM5\2Inhe Meter<CR><LF>
15:46:43 BaudRate is : 9600
15:46:43 Moving to mode E.
06 32 35 32 0D 0A
15:46:46 Send SNRM request.

Dear Sir,

I hope this message finds you well. I am reaching out to seek your guidance and assistance regarding a project I am working on.

I want to read meter value from the Director but unable to obtain connection. I need your help to configure as I do not see my meter selection

I can read using below command,

python main.py -h 183.171.15.226 -p 4001 -c 20 -s 255 -t Verbose -P 33333333

Hi,
After reading current association from iT30 Inhemeter meter, some objects seem to be invalid and I can't save the gxc file without first deleting them. (Trying to save results in the "There was an Error generating the XML document")
1.0.32.8.[0-8].255 for example, the Unit field is empty, and the last line in the gxc file is <Scaler>.
Looking at the log file, it appears that for several objects the meter returns Unit 0xFA, which to my knowledge doesn't exist in the standard.

Other objects, I tried, are OK, But when I want to read IPv4 Setup object, only clearing communication log window is happening. None packet is sent. After time, I can see "Send Keep Alive" packet. The behaviour is for Com port connection and for TCP connection same.