Forum Rules

Before commenting read Forum rules

Don't comment the topic if you have a new question.

You can create a new topic selecting correct category from Gurux Forum and then create a new topic selecting "New Topic" from the top left.

Description

Questions and comments about DLMSDirector.

Image
By kalibalinux , 23 January, 2024

Failed to connect to E570 Landis+Gyr meter with Gurux

Forums
DLMSDirector

Hi my friend, I have an electric meter landisgyr E570 serie2 firmware V84.10.12 and I use GURUX DLMS DIRECCTOR to read data with optical probe
but when I try to connect with optical probe it says "device not reply"
can you please reply to me I really need your help thanks

By batulzii , 20 January, 2024

time shows different than payload received

Forums
DLMSDirector

1: 7E A0 19 03 25 F6 27 3F E6 E6 00 C0 01 C1 00 08 00 00 01 00 00 FF 02 00 60 1A 7E
<HDLC len="18" >
<TargetAddress Value="1" />
<SourceAddress Value="12" />
<FrameType Value="F6" />
<PDU>
<GetRequest>
<GetRequestNormal>
<!-- Priority: High, ServiceClass: Confirmed, Invoke ID: 1 -->
<InvokeIdAndPriority Value="C1" />
<AttributeDescriptor>
<!-- Clock -->

By SmileLime , 5 January, 2024

Can't change passive calendar name

Forums
DLMSDirector

Hello!
When I change Passive Calendar Name to "Default" I get an Error from the meter.
I noticed that in TX from DLMSDirector name is passed directly without encoding it to Octet String.

08:29:36 Writing object 0.0.13.0.0.255, interface ActivityCalendar
TX: 7E A0 1E 02 21 25 32 3E 8D E6 E6 00 C1 01 C1 00 14 00 00 0D 00 00 FF 06 00 09 02 DE FA EA FA 7E

When I do the same for Week Profile it works fine and week name is encoded

By Viet , 12 December, 2023

CEWE Prometer 100 W with Gurux GXDLMSDirector

Forums
DLMSDirector

Hi!

I'm trying to read the CEWE Prometer 100 W with GXDLMSDirector and it always return this message "Failed to receive reply from the device in given time"
I use the Device monitoring studio to capture the READ/WRITE packets in reading time and realise that the source/destination in write packet is not simillar to the packet I captured when I successfully connected to the meter via M-Cubed 100 application.

By Alek123 , 11 December, 2023

DLMSDirector EMH formula

Forums
DLMSDirector

Hi,

I'm trying to read the EMH LZQJ-XC meter using DLMSDirector.
As far as i know i should to use this formula: SN%10000+256.

The question is where should I provide this formula (which tab and parameter)?

Thank You.

By oulahsensaid , 23 November, 2023

Index was out of range. Must be non-negative and less than the size of the collection parameter name:index

Forums
DLMSDirector

Hi Mr. Kurumi. Please could you give me a hand with this prblem:
20:27:01 Initializing serial connection.
20:27:02 IEC Sending:/?!<CR><LF>
20:27:03 HDLC received: /SLB5\2SLB_AMBER_000001<CR><LF>
20:27:03 BaudRate is : 9600
20:27:03 Moving to mode E.
06 32 35 32 0D 0A
20:27:06 Send SNRM request.
7E A0 08 02 23 03 93 3E 74 7E
20:27:07
7E A0 21 03 00 02 00 23 73 7B 7F 81 80 12 05 01 80 06 01 80 07 04 00 00 00 01 08 04 00 00 00 01 53 3B 7E
20:27:07 Parsing UA reply succeeded.

DLMSDirector