GSM diagnostic
This object reports mobile network registration, active services and radio cell information. It helps explain whether a meter's modem can communicate through the cellular network.
When to use it
Use it to investigate a meter that cannot register with its operator or has poor radio reception.
Attributes
1. Logical name
The OBIS code that identifies this object instance in the meter. Use it to distinguish this instance from other objects of the same class.
2. Operator
Shows the name of the mobile network operator.
3. Status
Shows modem registration state, such as searching, registered at home, roaming or denied.
4. Circuit switch status
Shows whether the circuit switched service is inactive, receiving a call or active.
5. Packet switch status (version 0)
Reports inactive service, GPRS, EDGE, UMTS or HSDPA.
5. Packet switch status (versions 1-2)
Reports inactive service, GPRS, EDGE, UMTS, HSDPA, LTE or CDMA.
6. Cell information (version 0)
Describes the serving cell using a 16-bit cell identifier, location area code, signal quality and bit error rate.
6. Cell information (versions 1-2)
Describes the serving cell using a 32-bit cell identifier, location or tracking area code, signal quality, bit error rate, mobile country code, mobile network code and radio channel number.
7. Adjacent cells (version 0)
Lists nearby cells using 16-bit cell identifiers and their signal quality.
7. Adjacent cells (versions 1-2)
Lists nearby cells using 32-bit cell identifiers and their signal quality.
8. Capture time
Shows when the diagnostic information was last captured.
Versions
Attribute availability depends on the object version reported by the meter (version 0: attributes 1-8; version 1: attributes 1-8; version 2: attributes 1-8). Use the version-specific descriptions above when an attribute's meaning or representation differs.
Actions
There are no actions available for this object type.