Hello Mikko,

While testing for profile generic Interface class, I'm facing issue while reading profiles. Initially when default capture objects are present, and I try to read the profile, it read successfully with correct data, and number of profile entries. But when I add capture object from GuruxDlmsDirector, and try to read the profile I'm getting "The number of columns does not match" error dialog box.

Hello,
I am new to using Gurux and I am trying to read the Billing Profile of an SL7000 meter and I encounter the following problem:
I have only been able to read the last set, I have tried 2 different meters that have different firmware and I always get the last set.
On the other hand, I downloaded the historical data from both meters with ACE PILOT and I get all the SETs stored, but with Director or with the Python client example only the last one.
I would like to know what I am doing wrong or what is the limitation and would appreciate the help.

HI Mikko,

I have a smart meter and I want to read its data using DLMSDirector with TCP/IPv6.
Is DLMSDirector supports TCP/IPv6 connection type? If not, then kindly suggest me any other option.

BR,
Pradson

Hello,
I would like to use GuruxDirector to read data from STZ351 from star instrument via optical probe. do you have any default setting for this meter.
Thanks

Device supports multiple profiles, out of which, on reading one of the profile data, error message popup "The number of columns does not match", other profile's data are read successfully without any error.

Hello.

How i can read meter ZMG310AR? it's a Landis&Gyr E550

I try parameters in screenshot, but nothing happens

Hi.
First part Logfile, second part physical monitoring serial ports
Who can explain.
Thanks.

I am getting ServiceError ReadException. Service Unsupported while trying to read anything from Secure Premier 300 meter. Log is given below.

I Mikko,

I am working with GXDLMSDirector configured as:

Authentication: HighGMAC
Interface: HDLC
Media: Serial
Security: AuthenticationEncryption

When I use the 8.1.2005.1401 version(old version) gurux works fine with my meter, but when I try to establish an association with 8.2.2006.1702 version(new version), gurux sends the message:

Access Error: Device reports a hardware fault.

I have this when talking to my meter, I was told simple security, password 12345, using serial port.

I think the problem is parsing the addressing, see the DLMS translation below.
According to docs I received, addressing seems to be 7-bit per byte, and LSB = 0 for long address, 1 for short address. You ALWAYS uses the physical server and long addresses.

As I see it, you send target 2001 = long way to write 0x21 aka 0x10 << 1 + 1.
For source you use 29 in SNRM request, that is 0x14 << 1 + 1 - So that is fine