GXDLMSDirector 8.1.1906.1301
Log created 16:21:17
16:21:19 Initializing serial connection.
16:21:20 IEC Sending:/?!<CR><LF>
16:21:21 HDLC received: /ISK5\2ME371-2105<CR><LF>
16:21:21 BaudRate is : 9600
16:21:21 Moving to mode E.
06 32 35 32 0D 0A
16:21:25 Send SNRM request.
7E A0 08 02 23 C9 93 E4 43 7E
16:21:25
7E A0 1F C9 02 23 73 B4 96 81 80 12 05 01 7E 06 01 7E 07 04 00 00 00 01 08 04 00 00 00 01 5F 75 7E
16:21:25 Parsing UA reply succeeded.
16:21:25 Send AARQ request.

Hello I'm trying to connect to a Calin CA168 meter. Since I don't have the optical cord with me, I am connecting to the Calin DCU via RS-485. I am unable to connect to them since Calin isn't on the list of manufacturers. I also tried Gurux as a manufacturer and same problem occurred.

This is the error code I keep getting: Failed to receive a reply from the device in a given time.

Hi,
I have get some datas from the GXDLMSDirector. I don't know it's worked or not, If it's working right please tell me which is KWh,KVArh. I have attached the screen shot below. And one more thing I used new ER300P meter, So no load is connected to yet.
Thank you
Regards,
mukesh.

I think in GXDLMSDirector the "clock" object shows incorrect time. According to standard, as I have seen, the "time" attribute is local date and time and that is what is returned by the meter () but GXDLMSDirector changes that according to deviation of time zone and daylight saving time (and maybe some other things).
Also "time_zone" attribute value is doubtful. If time zone is GMT+3, the deviation should be +180 min, not -180 min.
I'm not exactly sure about these issues so could you please clarify them.

I need to change the operating mode of the customer port from HDLC to real-time port. It's possible? what OBIS code should I use? How should I do? thank you.

Hello everyone,

I'm trying to read data from the new SAPHIR counters installed by ENEDIS on different production and consumption sites in France
.
Does anyone have experience working with this kind of technology? I'm trying to manually create the Manufacturer and OBIS Code configuration to access them, but there are some things that I'm not sure how to configure, specially authentication using the "clé client".

Thanks!

Hello,

I found an inconsistent behavior of Gurux DLMS Director while writing a value to a meter.

It is a Data Class where the Value attribute have type OCTET-STRING[12]

If I read the value, the meter answer with something like this:

09 0C xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx which is correct.

If I write the value, the Gurux DLMS director generates something like this:

0A 0C xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx

Using the latest version of the Director I found some problems in the structure of the GXDLMSProfileGeneric for the logical name 1.0.99.1.0.255 of the load profiles (but not only).

A + (1.0.99.1.0.255) does not have the Scaler and Unit values
Q1 (1.1.5.4.0.255) has them
Q4 (1.1.8.4.0.255) does not have them
A- (1.1.2.4.0.255) has them
Q2 (1.1.6.4.0.255) does not have them
Q3 (1.1.7.4.0.255) has them

Here is the traffic log of a tamper profile -
Response
7E A0 8A 41 03 96 0E 53 E6 E7 00 C4 02 81 01 00 00 00 01 00 82 00 72 01 02 02 0D

09 0C 07 E3 05 02 FF 0B 0F 00 00 01 4A 00 - RTC

12 00 C9 - ID

12 07 D0 - R-Current
12 07 D0 - Y-Current
12 07 D0 -B-Current

12 5D C0 -R-Voltage
12 5D C0 -Y-Voltage
12 5D C0 -B-Voltage

12 00 64 -R-PF
12 00 64 -Y-PF
12 00 64 -B-PF

06 00 03 BF C4
06 00 03 C2 08

Hello GURUX,
I'm having Energy meter (Hardware & code) and now I wanted to add DLMS feature on it. Kindly tell me the ways to achieve it.

Regards,
Martin.