Hello, How can I create a .gxc file for a new meter?

Or even, when you create a new connection following the steps in (http://www.gurux.fi//GXDLMSDirectorExample), the Object Tree will be automatically shown ?

I mean, when I open a .gxc file for a given meter, the Object Tree of COSEM object loads, but, if I don't have the .gxc and create the connection manually, the Object Tree of this new meter will be automatically loaded as well ?

Regards,

Hugo.

Hello, I'm working in a project that requests the preparation of some Test Cases of General DLMS Meters, I have to translate those test cases to a Gurux-like manual.

We are actually using the Yellow Book 6th Edition.

So, I'm asking to know if anyone has already implemented Yellow Book Test Cases using gurux, I know the existence of Conformance Test in Gurux and that you can use some XML to make tests too, but it is quite obscure for me the link with DLMS Yellow Book.

regards,

Hi,
Is parameter negotiation supported ? I see director sends SNRM frame without parameter negotiation bytes.

the Token gateway have a methods 1.enter(data)
how to exectue it, It seems that I didn't find it on the software.

Hi everyone,

I've an electric 3 phase meter DTSD545, Holley.
With RS485 and DLMSDirector, there is successful connection between my ardiuno and DTSD545 on GXDLMSDirector.
However, I can not call object list from DTSD545. How you please advise me how to call a object list /Association View/

Hello,
I am trying to connect to a Clou DLMS meter and am having trouble getting a response. I keep getting "Failed to receive reply from the device in a given time." I've attached the pictures of the settings I used.
In the logs, it appears the meter isn't responding to an SNRM request.

I am using an infrared optical probe to communicate with the meter. The driver I'm using for the probe is Silicon Labs CP210x USB to UART Bridge. I'm not sure if this is a problem with the optical probe or a problem with the meter/software.

Yesterday I tested to read the MetCom MCS301 via Ethernet-Modem (HDLC) and it worked with LLS.
After some fiddling with settings and keys I managed to connect, read assoc. & values via HLS as well.

Send this to a partner, he was not able to read via HLS. Today a new version of DLMSDirector was updated (8.2.1909.2501) and now I can read the meter via LLS, but it fails via HLS ("connection rejected").

Hi,

I'm using GXDLMSDirector to manage Italian Manufacturer OBIS.
In particular I'd to modify attributes values type.

For instance the law defines the OBIS attribute as:
value ::= structure {
a: double-long-unsigned
b: double-long-unsigned
c: double-long-unsigned
}

In the GXDLMSDirector, the obis attribute is:
<Array>
<UInt8 Value="0" />
<UInt8 Value="0" />
<UInt8 Value="0" />
</Array>

Hi, I am trying to connect Sagem CX2000-9 meters through optical port, serial. Is there any inital settings dedicated to this meter. Thanks in advance
Caner

Hello Mikko,

While reading a Landis+Gyr meter directly with GXDLMSDirector, last version, I see there are not cumulative demand register listed, codes like [1.1.1.2.x ] does not even appear in GXDLMSDirector

in GXDLMSDirector DemandRegister only show current averages
in MAP110 DemandRegister show also cumulative codes, like 1.1.1.2.0, 1.1.1.2.1, ...

OK, at first glance it *seems* a problem of access rights.. but how it's possible I can read those same codes with user NONE and no password with MAP110.