Hi,

Thank you for your great library and for open sourcing it.

I'm currently running a proof-of-concept and I'm trying to modify the IPV6 Configuration of a meter using your GXDLMSDirector connected to the meter's optical head port.

I can connect to the meter and get the list of all the objects, great!

Then I read the content of the IPv6 Setup object "0.0.25.7.0.255" which allows me to get the content of all the attributes.

See the result here:

https://imgur.com/a/ES28QiB

Good day.
Please tell me if Gurux.Direct has encryption support
"AES-GCM-128 authenticated encryption, ECDSA P-256 digital signature, ECDH P-256 key agreement, SHA-256 hash, V.44 compression and AES-128 key wrap" and "AES-GCM-256 authenticated encryption, ECDSA P-384 digital signature, ECDH P-384 key agreement, SHA-384 hash, V.44 compression and AES-256 key wrap"?
How can I configure?
Thank you.

I am trying to communicate with Actaris ACE5000 meter. The parameters selected are:
Client address : 10
Physical Server : 11
Logical Server : 1
Wait time : 5
Authentication : None
Media : Serial
Manufacturer : Actaris Electricity
Start Protocol : DLMS.
Logical Name Refrencing : true.

When I try to connect, I get a response "Failed to recieve reply from device in given time". How can I fix it?
Thanks and Best regards

Gustavo Boroni

Hi,

I am new to DLMS meter. I have taken gurux.dlms.server.example2.java as meter and DLMS Director as client.

I am trying to connect meter in secure mode with settings as shown in attached screenshot. But I am getting below error.

I have an Elgama 300 G3A.144 meter, and i try to use GXDLMSDirector to read the serial number start with 0 using start protocol IEC, however the GXDLMSDirector will auto remove the first 0, could you please advise how to enter the S/N with starting 0 ?

win10 install GXDLMSDirector.application ERROR

Hello,

I wonder why there's more applicaiton tests in DLMSDirector (left image) than in http://www.gurux.fi/gurux.dlms.ctt.tests (rigth image).

Do you have the description of DLMSDirector Application Tests ?

Hello, I am facing a problem in my project.
I already have made some questions, but this time I'll explain better.

We are developing a new meter. For this development we need to create a test plan, that's why we are using Gurux.

my err describe:
when I click read object button,
first, read classid = 15, att=2;
second, read OBIS;

in the second step, it will read the object which i don't support. such as (0007*0100620200FF*03) .
and I check meter send to DLMSDirector, don't have this obis.

so my question is:
1. how did this DLMSDirector work, have some technical usermanual decument?
2. in this situation, meter reply 'unmatched type', I think it's OK, but DLMSDirector stopped and report err.

Hi!

I'm writing because I can't get a connection with my meter using Address Type: SerialNumber method.

As it's my first post in this forum, I'd like to thank Kurumi for sharing Gurux solution, which is extremely helpful in developing a smart-metering application.