Hello!
How to add a certificate for ECDSA authorization in Gurux Director (and later in AMI)?

Hi Mikko,

I used Gurux Director for meter testing, however currently I found an issue in writing Data object due to data type "None".
If I used saved gxc file in which previously saved datatype which support the object, write works perfect.
In opposite to it, if I add new device and download all objects which have "None" data type set in Data objects. Now I try to write directly to any object then get attached error.
But if I read prior to write any Data object value then it works, as data type is changed after Read operaion.

Hi friends,

I would like to use the DLMSDirector to read data from a Landis Dyr E650 meter, the meter is with battery only, without AC connection. --I can see some data by press the buttons on meter.

so if I install DLMSDirector and connect my pc to the meter cu-B2 using a USB-RJ11 cable,
and the meter is with the battery only, can I read the meter data ? or I have to connect the meter to AC ?

thanks.!!

Hello!
Didnt find the way to use LN_WITH_CIPHERING with DLMS suite 1 auth.
Can you help?

Hi,

I have implemented a Manufacturer specific DLMS Class for internal purpose and some of its attributes are part of some Instantaneous and Event Profile. So when i read those Profile Generic Obis codes Director fails to populate the Value buffer and Capture Object of respecive Profile Generic Obis code e.g. Instantaneous.

1. Is this the known problem?
2. Can we have solution such that Director just parse unknown Class attributes based on its Data Type and move forward and populate the known data.

Thanks in advance

Hello Mikko,

While testing for profile generic Interface class, I'm facing issue while reading profiles. Initially when default capture objects are present, and I try to read the profile, it read successfully with correct data, and number of profile entries. But when I add capture object from GuruxDlmsDirector, and try to read the profile I'm getting "The number of columns does not match" error dialog box.

Hello,
I am new to using Gurux and I am trying to read the Billing Profile of an SL7000 meter and I encounter the following problem:
I have only been able to read the last set, I have tried 2 different meters that have different firmware and I always get the last set.
On the other hand, I downloaded the historical data from both meters with ACE PILOT and I get all the SETs stored, but with Director or with the Python client example only the last one.
I would like to know what I am doing wrong or what is the limitation and would appreciate the help.

HI Mikko,

I have a smart meter and I want to read its data using DLMSDirector with TCP/IPv6.
Is DLMSDirector supports TCP/IPv6 connection type? If not, then kindly suggest me any other option.

BR,
Pradson

Hello,
I would like to use GuruxDirector to read data from STZ351 from star instrument via optical probe. do you have any default setting for this meter.
Thanks

Device supports multiple profiles, out of which, on reading one of the profile data, error message popup "The number of columns does not match", other profile's data are read successfully without any error.