Forum Rules

Before commenting read Forum rules

Don't comment the topic if you have a new question.

You can create a new topic selecting correct category from Gurux Forum and then create a new topic selecting "New Topic" from the top left.

Description

Questions and comments about DLMSDirector.

Image
By Chris_Zhu_1986 , 11 March, 2023

reading “Security setup”.certificates

Forums
DLMSDirector

Hi,
I have a problem with reading “Security setup”.certificates by gurux.
According to the description of the Blue Book,The octet-strings that hold the serial_number, issuer, subject, and subject_alt_name shall include the tag, length and value (TLV) of the corresponding field of the Certificate.
But the gurux seems does not include the TLV ，when I read certificate from meter,it shows unreadable character ，below is an eaxmple from CTT and also the data from meter.

By walloso , 8 March, 2023

Meter MeteRSit HDLC

Forums
DLMSDirector

Hello I'm unable to unlock hdlc on MeteRSit smart meters. I have a couple of test meters with management key but I cannot unlock. This is the command oline: -S COM1:9600:8NoneOne -c 20 -a HighGMAC -C AuthenticationEncryption -T 9336563412067A03 -A 2E07325C37666A1B202A3F3D5A664E30 -B 35353535353535353535353535353535 -v 0.0.43.1.3.255 -d Italy -t Verbose PS I dont' know which "block cipher key" use. Please colud you help me ? Thank you

By oulahsensaid , 25 February, 2023

Data objects missing ?

Forums
DLMSDirector

Hi Gurux team, please could you give me a hand. I'am trying to read data from Actarice meter using Optical Probe, thank you in advance.
Here are the results showing by GXDLMSDirector:
GXDLMSDirector 9.0.2302.2001
Log created 16:15:40
Initializing serial connection.
IEC Sending:/?!<CR><LF>
HDLC received: /ACE5\2ACE6K_MK2_R2<CR><LF>
BaudRate is : 9600
Moving to mode E.
06 32 35 32 0D 0A
Send SNRM request.
7E A0 08 02 23 21 93 BD 64 7E

By oulahsensaid , 24 February, 2023

Data objects missing

Forums
DLMSDirector

Hi, thank you for the great DLMSDirector tool.
I'm trying to read data from ACE meter, but, I think some data objects are missing, and I dont know why? Please could you give me a hand me?

By Bohdan_D , 24 February, 2023

Elgama EPQS meter

Forums
DLMSDirector

Hi.
I try to read the data from the Elgama EPQS meter
A manual from his meter says he supports IEC 62056-31 standard

GXDLMSDIRETOR supported standard IEC 62056-31? Could I read the data from this meter using GXDLMSDiretor or will my attempts be unsuccessful?

By suri371994 , 22 February, 2023

GXDLMS Director Read DLMS Meter HDLC Packet details

Forums
DLMSDirector

when I read the L1 Voltage in the GXDLMS Director, I wonder 2 times the read command packet was observed in Log File.

Please mention the Comments below mention read command and Response from the Device.

Note: In the Director, I was sent 1 time to Read the L1 Voltage.

By mekam srilatha , 16 February, 2023

L&T EM101+ reading

Forums
DLMSDirector

hi sir iam unable to read data in gurux dlms director for L&T EM101+ meter
settings are 9600 none 8 bit one stop bit
authentication Low, password: lnt1
16:47:18 Initializing serial connection.
16:47:19 Send SNRM request.
7E A0 07 03 23 93 BF 32 7E
16:47:19
7F BF 7E A0 1E 23 03 73 7B CF 81 80 12 05 01 80 06 01 80 07 04 00 00 00 01 08 04 00 00 00 01 53 3B 7E
16:47:19 Parsing UA reply succeeded.
16:47:19 Send AARQ request.

By mekam srilatha , 15 February, 2023

Reading L&T EM101+ meter

Forums
DLMSDirector

Hi sir,
iam trying to read L&T EM101+ meter data using DLMS director.
but iam unable to read data. iam getting error as failed in diconnect mode.
settings are client address is 0x11
authentication: Low
password: lnt1

on meter it is printed as compatible with IS 15959 CAT C3

this is my log

DLMSDirector