Hello,

when I open GXDLMSDirector I get this error:

'Could not find a part of the path'

After I close this window the software opens normally. So my question is if this error is important or can I dismiss it?

Thank you in advance

hello,
about gateway I have some problem.

how to set the gateway clientID and meter id when both of them use hdlc

if client use rs485 to gateway and gateway use rs485 to meter
client --HDLC-- gateway--HDLC--meter

1. client should send snrm to gateway,
2. gateway respone ua
3. client send gateWay protocol E6 xx AARQ
4, the gateway send snrm to meter or hdlc with aarq?

otherwise , gateway---meter clientId should be what?

Hello!

I would like to know what steps should be followed to have this software correctly installed and if it is necessary to download the DLMS libraries in GitHub beforehand for its correct development,

Thank you

Hi Kurumi,

First off, thank you for establishing and maintaining this forum!

I read data from my Kaifa MA309 / wired MBus interface using a raspberry / python script using your lib.
Reading the topics here in the forum I could confirm my findings, that 2 telegrams are sent each 5 ms cycle and that the data sent each cycle is 376 bytes.

Pasting the received data into GXDLMSDirector / Tools and translating however, it cannot not decrypt the encrypted message part - see pasted code below.

Hi, Kurumi.
Please, I have an issue whith ACE6000 meter.
Obis code missing(1.1.1.6.1.255 for exemple) in ExtendedRegister list, but exist in Profile generic.
Thank you in advance.

Hello Team,

Gurux director tool to energy meter we are communicating that is one to one communication. Now we want to communicate Gurux director tool to multiple meters. can you guys guide us how to communicate with multiple meters.

Regards,
Srikanth.

When the certificate is export and remove, the software does not send issuer in X.509 v3 DER format

Hello,

I am connected to a meter and I can Read data from it.
I also want to Read Object on ProfileGeneric but the option is disabled.

How can I enable Read Object?
GXDLMSDirector version is 9.0.2303.2302

Thank you!

Image transfer via TCP port using image resume service in this case image transfer again restart whereas resume transfer is completed.

Hi Mikko,

I am testing the Image Transfer feature.

All blocks were transferred successfully, and also verified the image.

When I am going to execute the method to activate the new image, I am getting the "Inconsistent class" error response.
Payload: c701c10900

Can you please provide your valuable suggestion, when this erro will come and how
to resolve that ?