Dear sir,
I want to know the process to receive push of DLMS smart meters on Gurux via TCP connection.
I have done a lot of research but i am unable to find such a way to receive push notifications on Gurux.
--

A while ago I bought an Apator OTUS-1 meter to play with IEC-62056. It turned out to be a bit different than expected since meter protocol is dlms/cosem and thus optical part is just beginning of joy.

Since meter is protected I asked manufacturer about readout procedure. I received bunch of values:
1) Authentication
2) Unicast
3) Broadcast
4) Master
5) Password

Greetings,

I'm currently using Gurux Director Software to read data from a DLMS Meter. I've successfully added the meter and established a connection to it. After connecting, I've read the Associate View and Scaler (asked by Software on First Connect).

Next, I've proceeded to read the Instantaneous Profile, where I noticed that the Power Factor (PF) value is correctly displayed as 1. However, when I read the Month Bill Profile, the PF value appears as 100, indicating that it's not divided by the scaler.

GXDLMSDirector checks for updates on start
If the Internet is unavailable, it reports an error but you can't continue working with the current version. It allows only to close the application.
It's ridiculous in my opinion.

Hi,

Im trying to read the Itron SL7000 meter by using setting of authentication to Engineer 1 but when I try to connect with it for the first time, the disconnect mode error appear. How do I resolve this? Is it because of wrong password or something else? The other type authentication works well when connecting into it but for authentication Engineer 1 to 3 it gave the same disconnect mode error.

Best Regards,
F

Hi Mikko,

We have tried to read the Billing Profile Object from the Indian standard (IS16444) supported meter.

From all other profiles generic objects we are able to read using Range Selector because, in that, the First obis code is of Clock where as in the billing profile it is Billing Date.

Hence the Range selector is not working for the billing profile.

Can you please check into that and provide an update on how to read using the range selector?

Hello

I am trying to connect Holley DDSY283 smart meter using dlms.

But it returns:
GetObject failed. Access error: Device reports a temporary failure.

Greetings Kurumi sir,

We are trying to fetch data from an EM101+ L&T meter but it is showing "Failed to receive data from the meter in the given time". We have tried the following things by researching the old forum discussions,

Gurux DLMS Director seems to have an inverted logic for enabling/disabling schedule entries.
According to the Blue Book,
the first two indices specify the disable range while the last two indices specify the enable range.
It's the other way around if you debug what Gurux DLMS Director sends.
For example, I wanted to ENABLE an entry with index 2. This is what I received from Gurux DLMS Director:

Hello,