import gurux_dlms
import gurux_common
import gurux_serial
import gurux_net
from gurux_dlms import*
from gurux_common import*
from gurux_serial import*
from gurux_net import*
import serial
import time

client = GXDLMSClient()
client.useLogicalNameReferencing = True

client.clientAddress = 16
client.serverAddress = 1

windows 10 its running fine but after windows 11 installation not able to read profiles

Hello Sir,

I am currently working on Gas-meter and using Gurux ANSI-C library to make the meter compitible to DLMS protocol.
The meter is responding well to meter-reading and controlling commands using Comms-cord.
Recently we get the meter tasted for the certification on CTT 4.3 release 103.
The compliance test report states,

T_HDLC_FRAME_P2: InterFrameTimeout
VERDICT: InterFrameTimeout FAILED(Frame length subfield value (30) does not match frame length (1))

I would like to ask for your guidance regarding this.

Hi, I am using your Gurux Serial library for Android to communicate to some meters. It usually works but sometimes is like the meter block me from connect. (All the probe configs, passwords, etc are correct)

From the same meter I have this log when the connection is successful:
7EA0080221039386C17E

7EA01F03022173734281801205018C060180070400000001080400000001F5437E

7EA0450221031043CAE6E6006036A1090607608574050801018A0207808B0760857405080201AC0A80083239343531313937BE10040E01000000065F1F0400001E1DFFFFFDF87E

Hi,
I am using Microchip PIC32MX350F256L controller for implementing the code. I try with Hardcoded data as per below and Got data successfully in the buffer from the Energy meter using serial communication
"Send SNRM request.
TX: 7E A0 07 03 41 93 5A 64 7E
RX: 7E A0 1E 41 03 73 8E 7F 81 80 12 05 01 80 06 01 80 07 04 00 00 00 01 08 04 00 00 00 01 53 3B 7E

Good afternoon, sir.
You can add to gurux.io.BaudRate (Android) value 460800?
Or tell me how i can set this value.

Baudrate.java have max 38400 value.

public enum BaudRate {
/**
* 38,400 baud.
*/
BAUD_RATE_38400 (38400),

/**
* 19,200 baud.
*/
BAUD_RATE_19200(19200),

Hello,
I have a problem with reading L+G E650 over RS485.

I received some strange errors:
- Err! Failed to read columns:Access Error : Device reports Read-Write denied.
- Attribute2 is not readable.

I tried to read object without password. These OBIS codes was red with .MAP110 without issues, but with Gurux.DLMS.Client.Example there are a issues.
Also i tried with -a Low -P xxxxxxxx - again with .MAP110 is OK, but cannot read with gurux.python.

Command: python3 main.py -S /dev/ttyUSB0 -s 1 -c 16 -r sn -t Verbose

Hi. I have RF reader, based on CP210x UART Bridge with two USB interfaces:

I create project in Android Studio, kotlin, add Java Modul Serial.

val port = serial.getPorts()
get two ports, that have same names:
0 = {GXPort@17520} CP210x UART Bridge
1 = {GXPort@17521} CP210x UART Bridge
gxport = port[0] or gxport = port[1] have same result

this Is my code :

public bool ConnectSerial(string auth, string password, out string Historia)
{

ObiektOdczytuLicznika = null;
ObiektUstawien = new UstawieniaLicznika();

I have been easily been able to send data using the library using VB NET.

Can I set an event handler to read the data if the serial port receives data?
How do I read the data?

Examples would be great.

Thank You!