How can i set up EMH meter by EMH Metering GmbH? It always say that "failed to get reply from the device"..i am using com port...what should i do?

I have used Gurux GXDLMSDirection version 8.1.1807. My meter used Texas Instrument DLMS library.

We have some question about authentication security and transport security that supported by GXDLMSDirector.

1. Is the GXDLMSDirector support authentication algorithm AES-128 (mechanism_id = 2) ?
if it supported, please give us the settings of GXDLMSDirector to run the authentication algorithm

hi,
i'm reading the registers of some Iton SL7000 761 Ref. Firmware 5.35 using ACEPILOT software using GSM modem.
i would like to try to do it also with GXDLMSDirector 8.0.1703.1301 using GSM modem (by terminal).
please, can you give me info about the default initial settings?
moreover:
- the firmware version must be set in any place? in ACE pilot software it is required!
- the meter Serial number must be set in any place? in ACE pilot software it is required!
i hope to receive a feedback!
best regards Claudio Liciotti

hi,
i'm reading the registers of some Iskra MT831 using lpreport software using GSM modem.
i would like to try to do it also with GXDLMSDirector 8.0.1703.1301 using GSM modem (by terminal).
please, can you give me info about the default initial settings?
moreover the meter Serial number must be set in any place? in lpreport software it is required!
i hope to receive a feedback!
best regards Claudio Liciotti

Hi I am a college student.

I have a question.

There is a problem with using DLMSDirector.

First, meter manufacturer to communicate is Namjun(G-Type).

The meter supports RS485(RJ11) communications.

So I connected to the meter using a USB-RS485(RJ11) converter.

Then, they created a manufacturer through 'Tools-Manufacters-New' from DLMSDirector.

Flag ID : NJC
Name : Namjun
Web Address : http://namjun.com/ko/
Standard : DLMS
Start protocal : DLMS

Hi,

I have used Gurux GXDLMSDirection version 8.1.1807. My meter used Texas Instrument DLMS library. When I connected to my meter with gurux director in lowest authentication (no authentication), we got 4 objects. We can read 3 other objects, but when I read clock object, I got error message Insufficient Memory
Why this problem can happen ? Can you guide us how to solve this problem?

Thank you.

Hi,
Failed to receive reply from the device after sending SNRM request. I am connecting meter over tcp connection. what should be the cause of this error?

Find the logs below:

Hi,

I would like to read the profile of an Itron smart meter with the GX DLMS director, is there a way to do this?

Thanks for any answer!

Hi !

I am trying to connecto to an Elster A1052+ via USB probe with no success, I have tried lots of configuration.. According to its specifications its maux baud rate is 2400 , and its IRDA port is IEC 62056-61 compliant..
I always receive "Failed to receive reply from the device in given time.";
If someone has any hints, it will be highly appreciated

best regards

I'm unable to connect to a L+G E650 with a serial number.
The serial no. is 11001002