I am trying to connect via DLMS over TCP (in Wrapper mode) to a WFET-1600 (Wasion) device.
http://www.wasion.com/EN/pro/468.html
Communication is not established at the authorization stage, while the manufacturer's test software (also with DLMS) is working normally.
Here is the test software authorization request:

After the last 2 upgrade of DLMSDirector i have a problem with pre-established Application Associations.
I have a serie of meters configured with pre-established AA (client 1) and server system title of 8 byte (like 8305678802000403).
After the last upgrades the check for pre-established AA in the Secured connections tab of Device properties result unchecked, but in the entries there is the correct System title i have originally configured and if i connect to the meter the connection work like before

How to set custom object with xml edit?

is there any example ?

Hi Gurux

I am trying to connect to a meter (L&G E650 B31), but i get "Invalid Tag".

Trace:

08:52:54
<HDLC len="9" >
<TargetAddress Value="1" />
<SourceAddress Value="10" />
<FrameType Value="93" />
<Snrm>
</Snrm>
</HDLC>

Hi Kurumi,
Hope you are doing well.

I have a Chint DLMS meter and I want to read it using GXDLMS director tool. But, I am not able to find this meter name under Manufacturer option. Can I use other manufacturer name or there is some other alternative method.

Also, Can we use the same C stack(We have purchased from your company long back ago) in Micro Processors(Linux) to read DLMS meter. We are successfully able to read using Micro Controllers.

Pls help.

Thankyou,
AyushK

I am having the issue in collecting the object list from the device. For SNRM i am able get the response, after that GetObjectList failed message popups.

So please help with this issue.

Hello.
When I try to read the event log, an error occurs: "Not enough memory to continue running the program" and "Unacceptable frame".

18:39:31 Access Request
TX: 7E A0 56 03 0F 32 02 C5 E6 E6 00 D9 C0 00 00 01 00 06 01 00 07 00 01 63 62 04 FF 04 01 00 07 00 01 63 62 04 FF 05 01 00 07 00 01 63 62 04 FF 06 01 00 07 00 01 63 62 04 FF 02 01 00 07 00 01 63 62 04 FF 07 01 00 07 00 01 63 62 04 FF 08 06 00 00 00 00 00 00 20 92 7E
18:39:36 Data send failed. Try to resend 1/3

Hi,

I'm testing the DLMS.AMI solution with the GXDLMSDirectory.
Whenever I try to capture and view the Profile Generic data I get a cast exception after refreshing the view:

Hi Mikko,

I am trying to read Profile entries for Block Load with all options. In which reading by range & All, are working as expected. However, reading by range and last entry reading will not work with the error of "Invalid Data Checksum".

Please do the needful.

Thanks & Regards,

How do I input the OBIS code that contains the alphabet "C" in The DLMSDirector. Eg.

Credit Balance OBIS code = c.51.0

I get an error saying "Input string was not in correct Format"