Hi, Colleguaes

I used old version GXDLMSDirector and successeful connected to my DLMS device. After upgrade to V8.2.2.106 1501 I am not able to connect to my device and read data. I receive error

System.ArgumentOutOfRangeException: Specified argument was out of the range of valid values.
Parameter name: access
at GXDLMSDirector.MainForm.RefreshDevice(GXDLMSMeter dev, Boolean bRefresh)
at GXDLMSDirector.MainForm.Refresh(Object sender, GXAsyncWork work, Object[] parameters)

Help me, please, what does it mean this error?

Hi kurumi,

I'm using GXDLMSDirector 8.2.2106.1501
I can connect to most meters and can read everything properly.
But from one manufacturer even though I can read load profile.
But when I try to read billing data.
It's stuck for a while then the "Data Block Unavailable' error is thrown.
Here is the log

In order to configure SMS Push notification, I have to set Initialization string in the Modem configuration object (0-0:2.0.0.255).
But when I click on Add button nothing happens. All other parameters can be set without any problems.
Additionally, I have check Access rights and Read, Write access is available for all attributes.
There are no errors in GXDLMSDirector.log and LastError.log.
Smart Meter that I am using is Iskraemeco ME382-D1.
Screenshots are attached.
Please let me know if you need any other info.

i am new to fetch the meter reading data from dlms lnt meter using the optical port so now i am facing the
problem
this is my view log GXDLMS Director:

anyone can describe this info to gurux dlms director?

Hi everybody,
I am writing to ask you if you too have had the same problem with the connection to this type of machine (I am attaching photo1). I use an infrared port connected to a pc. I set gurux as Italian standard and started reading. I read in some other post that he had to create a new manufacture using the Italian standard settings but changing the machine name to EDi, but still I have the same problem.

Hi
I found a issue in indian standard mode, 15959 explained that in LLS data transfer only using the encryption, only during AA eatabishment using authentication and encryption, but now version, DLMSDirector only have select item for all the stage(means AA and data transfer). so we have below issue
in MR association. could you check the issue, thanks!

Has anyone used this meter?
I have tried multiple presets and configurations with DLMSDirector - no response.
However I'm not even sure if DLMSDirector can support this meter. As far as I can translate and understand it is IEC 62053-21? Which might be a monophase version of 62056-21?

I've also tried sniffing out the communication between it's program "S0-Recorder" with no success. Possibly because it involves changing baudrates.

Hi

After the latest update we are facing issues while downloading the object list. The object list gets downloaded but from the downloaded list ProfileGeneric objects are missing. We are able to open previously saved .gxc file and read profiles, but these objects go missing when we download the object list.

Regards
Shanthi Bandreddi