hi,
i'm reading the registers of some Iskra MT831 using lpreport software using GSM modem.
i would like to try to do it also with GXDLMSDirector 8.0.1703.1301 using GSM modem (by terminal).
please, can you give me info about the default initial settings?
moreover the meter Serial number must be set in any place? in lpreport software it is required!
i hope to receive a feedback!
best regards Claudio Liciotti

Hi I am a college student.

I have a question.

There is a problem with using DLMSDirector.

First, meter manufacturer to communicate is Namjun(G-Type).

The meter supports RS485(RJ11) communications.

So I connected to the meter using a USB-RS485(RJ11) converter.

Then, they created a manufacturer through 'Tools-Manufacters-New' from DLMSDirector.

Flag ID : NJC
Name : Namjun
Web Address : http://namjun.com/ko/
Standard : DLMS
Start protocal : DLMS

Hi,

I have used Gurux GXDLMSDirection version 8.1.1807. My meter used Texas Instrument DLMS library. When I connected to my meter with gurux director in lowest authentication (no authentication), we got 4 objects. We can read 3 other objects, but when I read clock object, I got error message Insufficient Memory
Why this problem can happen ? Can you guide us how to solve this problem?

Thank you.

Hi,
Failed to receive reply from the device after sending SNRM request. I am connecting meter over tcp connection. what should be the cause of this error?

Find the logs below:

Hi,

I would like to read the profile of an Itron smart meter with the GX DLMS director, is there a way to do this?

Thanks for any answer!

Hi !

I am trying to connecto to an Elster A1052+ via USB probe with no success, I have tried lots of configuration.. According to its specifications its maux baud rate is 2400 , and its IRDA port is IEC 62056-61 compliant..
I always receive "Failed to receive reply from the device in given time.";
If someone has any hints, it will be highly appreciated

best regards

I'm unable to connect to a L+G E650 with a serial number.
The serial no. is 11001002

Using obis code 1.0.0.0.3.255 in gurux, I'm not able to change the default value 256 to other values.
Gurux is showing read/write access for that data object, but still i am not able to write a value.

Same have been done using meter's manufacturer software. Please help in this issue.
meter used: Microstar P2000-T

Below is the trace content coming in the GXDLMSDIRECTOR:

03/07/2018 10:55:45 AM
<HDLC len="9" >
<TargetAddress Value="1" />
<SourceAddress Value="20" />
<FrameType Value="93" />
<Snrm>
</Snrm>
</HDLC>

Hi,
We have schneider 6400 and L&T ER300P smart meters which are connected to GTI (Grid-tie inverter) . We planned to get data centralised through prolific based converter (rs485 to serial) and libmodbus library. But data getting from ER300P is awkward (long integer data in register 40001 or 40002), but schneider responds. Please help to collect the data (Voltage , current , power , frequency) from ER300P.