I am having the issue in collecting the object list from the device. For SNRM i am able get the response, after that GetObjectList failed message popups.

So please help with this issue.

Hello.
When I try to read the event log, an error occurs: "Not enough memory to continue running the program" and "Unacceptable frame".

18:39:31 Access Request
TX: 7E A0 56 03 0F 32 02 C5 E6 E6 00 D9 C0 00 00 01 00 06 01 00 07 00 01 63 62 04 FF 04 01 00 07 00 01 63 62 04 FF 05 01 00 07 00 01 63 62 04 FF 06 01 00 07 00 01 63 62 04 FF 02 01 00 07 00 01 63 62 04 FF 07 01 00 07 00 01 63 62 04 FF 08 06 00 00 00 00 00 00 20 92 7E
18:39:36 Data send failed. Try to resend 1/3

Hi,

I'm testing the DLMS.AMI solution with the GXDLMSDirectory.
Whenever I try to capture and view the Profile Generic data I get a cast exception after refreshing the view:

Hi Mikko,

I am trying to read Profile entries for Block Load with all options. In which reading by range & All, are working as expected. However, reading by range and last entry reading will not work with the error of "Invalid Data Checksum".

Please do the needful.

Thanks & Regards,

How do I input the OBIS code that contains the alphabet "C" in The DLMSDirector. Eg.

Credit Balance OBIS code = c.51.0

I get an error saying "Input string was not in correct Format"

Hello,

has anyone been successfull in reading data from a Sagemcom T210-D meter? Im trying to connect through a serial connection (P1 Port). My Austrian energy provider (located in Styria - called E-Netze) provided me a "Global Unicast Encryption Key (GUEK)" and a Global Authentication Key (GAK).

I'm trying to connect with follwing settings:
Device Settings:
Manufacturer: Sagemcom Energy & Telecom
Interface: HDLC
Authentication: None
Client Address: 10
Media: Serial

Hello,

Using the GXDLMSdirector to test my server application, the HDLC test #2 failed.
I am not sure why this test scheme failed.

Here is the Trace result from GXDLMSdirector

HDLC test #2. SNRM request
TX: 7E A0 07 03 21 93 0F 01 7E
RX: 7E A0 20 21 03 73 73 98 81 80 14 05 02 00 E6 06 02 00 E6 07 04 00 00 00 01 08 04 00 00 00 01 B5 F3 7E
SNRM request succeeded. MaxInfoLengthTransmit: 230 MaxInfoLengthReceive: 230 WindowSizeTransmit: 1 WindowSizeReceive: 1

We bought several meters to check "Ivy Metering". For me, dlms is a new protocol (we mainly work with "modbus" and have not yet figured out how to work with it. I can not connect to the meter. Can you help me please?

I try connect with this configuration:
Authentintication level: Low
Interface type: WRAPPER
Client address: 0x10
Server address: 0x10
Password: 12345678

But it isn't work...

Hello Mikko,

I'm facing an issue with G3-PLC interface classes - 91 and 92.

For IC91 (G3PlcMacSetup)
- Write request is not sent from GuruX software for Key Table and Neighbor table attributes. Also Method is not visible.

For IC92 (G3Plc6LoWPan)
- Write request is not sent from GuruX software for Routing Table attribute.

I'm adding/Editing the data, but data is not written in meter. I verified the access rights for the attributes, and it is correct.

Hi,

i am trying to read this meter (Landis Gyr E230)

as the first instance, I create a new device and select "Landis + Gyr"

When trying to read, I get the error that the manufacturer does not match, it appears as "AMP", the meter is manufactured in Brazil (2017). As seen in the photo.

to solve this I create a new manufacturer, with "Flag ID" = "AMP", and I leave it the same as the original Landis + Gyr.