Hi,

I've an existing Actaris Electricity meter system, that was installed by another firm so I've got only few information. I'm trying to listen into the communication throught the serial port and I see that the SNRM request is like this:
7E A0 0A 00 22 00 CB 03 93 69 CE 7E

Hi,
Is there a open source DLMS Protocol Wireshark Plugin / Protocol Analyzer available to analyse a DLMS packet.

Hi

Do you have a sample event notification message sent out by a meter/server?

Thanks
Yatin

Hi, with u r support i have successfully downloaded all available objects and association view etc from Indian meter using C++ library. Many thanks for that. It was COM problem in Linux, especially Dialout permission to all users.
Now i wanted to read only specific objects using OBIS codes, eg: 1.0.32.7.0.255. voltage

I want to do the following:
1. How to make the DLMS.net client sample application work with DLMS.net server Sample application?
2. Is this just a simulation samples on Development Machine or can be tried on Power meter?
3. Is there any special class/type of Power meter this samples will work?
I am new to DLMS and need your help.

Thanks

I Wonder why did you use description of units as Unit?

7E A0 2A 03 61 54 06 F1 E6 E6 00 C1 01 C1 00 16 00 00 0F 00 00 FF 04 00 01 01 02 02 09 04 10 0A
27 FF 09 05 07 E1 04 06 FF 56 D9 7E

These three bytes :- "C1 01 C1"
some times it's "C4 02 C1" or "C4 01 C1"

thanks
deepak

Hi Sir,

Request: 20-06-2017 PM 04:01:13.83564 (+6.3064 seconds)

7E A0 2C 03 41 54 AF 99 E6 E6 00 C0 01 C1 00 07
01 00 62 01 00 FF 02 01 02 02 04 06 00 00 00 01
06 00 00 00 01 12 00 01 12 00 00 36 D2 7E

Answer: 20-06-2017 PM 04:01:13.88664 (+0.0510 seconds)

7E A0 07 41 03 1F 26 EC 7E

i am sending this command to reading billing profile for selective read by Entry. please can you explain why this error is coming.

Hello
Let's start the example of GuruxDLMSServerExample.
When you read the Association Logical Name, the error
*Access Error: Device reports a hardware fault.*
appears through the GXSDLMSDirector. [Image](https://gyazo.com/4c444fc3e2ce5451ca742c0600f918e0).

(first of all, sorry for my bad english, i hope that you will understand my problem)
Hi, I'm really new using the DLMS protocol and the GURUX's library (thanks for that), so maybe my question is gonna be quite basic.

Right now I'm working on an emulator using c++. It's formed by a set of meters and recienty finish the data collector. What i wanted to do is to autodiscover which meters are conected to the net where I collect data. (I haven't tested it with real meters but in a few days I will)