Hey Guys,

I updated the gurux assemblies to the latest version (Gurux.Common[v8.1.1709.2601], Gurux.DLMS[v8.5.1709.2602], Gurux.Net[v8.1.1708.2901]). Since there I'm unable to read the generic profiles by range. I always getting "Access Error : Device reports a unmatched type.". I think it's a problem with the convertion of the DateTime "from" and "to", but not sure.

I'm actually trying to read profile1 from a Landis + Gyr E350 over TCP/IP. I also tried different E350/E650 Meters without success.

Hi to all. Could you provide examples of polling the meter through the serial port? I did not find any examples on your site. I'm interested in Gurux.DLMS for Delphi. Please help me.

Hello, I'm having a problem compiling the component. Development Environment Delphi XE 10.2.

Problem when compiling the module Gurux.GXMD5.pas. Problem with string:
Update(@padding[0], padLen, buffer, @count[0], @state[0]);

[dcc32 Error] Gurux.GXMD5.pas(341): E2010 Incompatible types: 'System.TArray<System.Byte>' and 'Pointer'
[dcc32 Fatal Error] F2063 Could not compile used unit 'Gurux.GXMD5.pas'

Please help to solve the problem. Version of build 20170927.1

Hi all,
I have a Landis+Gyr 3 phase meter with optical readout. DLMS is mentioned near the optical port. I tried sending SNRM data to this port (I created the optical reader/writer with IR Leds and it seems to work OK). My optical reader/writer is connected to a serial port of a micro-controller. I tried different baud rates 2400 to 9600 but no response from the meter. Any suggestions please? Thank you.

Hi

I obtained the list of COSEM objects present in the meter by using readAllObjects method. I do not see any Push Setup Object in the retrieved list of objects. Is there any way I can set up this object on the meter and use it to fetch readings at regular intervals?

Thanks
Yatin

Hi,

We are trying to connect to an Iskra AM550 meter with HighGMAC authentication, but are having connection issues.
When connecting we catch the following exception: "Gurux.DLMS.GXDLMSException : Connection is permanently rejected. No reason is given.".

This is our code for creating the Gurux client:

Hello

We have an application where we previously used version 8.2.0.3 of Gurux.DLMS. We then had the following code:

Hi

I can see HLS support for to C++ at client side.
Is it supported at server side as well, can't see it in code.

Thanks,
Michael

SEND:- 7E A0 19 03 61 98 59 94 E6 E6 00 C0 01 C1 00 14 00 00 0D 00 00 FF 03 00 F7 8D 7E

RECEIVE:- 7E A0 32 61 03 B8 0D 1C E6 E7 00 C4 02 C1 01 00
00 00 01 00 82 00 1A 01 82 00 01 02 03 09 01 31
09 0C 07 D0 01 01 FF 00 00 00 FF 80 00 00 09 01
31 DF 00 7E

Hi sir,

i have read TOD profile for DLMS meter, in response what these four bytes represent "01 82 00 01".
Where i can the details for these bytes ?
thanks
deepak

Hi,

I'd like to read Association View using DLMS client, but implementing Simple Reading Meter example not working:

Connection is made by the server but this read not ok.

/// Read Association View from the meter.
GXReplyData reply = new GXReplyData();
readDataBlock(client.getObjects(), reply);
GXDLMSObjectCollection objects = client.parseObjects(reply.getData(), true);

client.getObjects() method is not implemented in the GXDLMSClient.

Can anybody help how to implement this read?

HorCsa