Dear Gurux Team,

I am facing an issue while attempting to update the firmware on a meter, and I need your assistance in resolving this. Below are the details of the error I'm encountering:

Error Message: Failed to update meter firmware.

Error Details: Insufficient memory to continue the execution of the program.

Logical Name: Not specified in the error.

Steps Taken:

I tried updating the firmware using the standard procedure.

when am trying to read data from my meter i get this error

Hi,
How can I set counter number with number only like GuruxDLMSDirector without obis code. I'm using gurux DLMS.Python.client

Hi,

I'm having problems connecting my meter to the XmlClient main.py file

I'm using this command:
python ./main.py -S COM6 -t Verbose -i HdlcWithModeE -c 16 -w 1 -f 256 -x "./Messages/LN/GetAssociationView.xml"

And receiving:

Hi.
I have a device with a physical address of 6538. I'm setting this address in GURUXDirector. But in the command line parameters, this address looks like "-s 22922" What's the formula for converting 6538 to 22922?

I am trying to make a new installation of the python DLSM/COSEM application. Testing the standard listener application gives the following feed back. What is the reason?

Hello Gurux team and community,

I'm trying to establish a connection with a DLMS meter using the Python bindings for gurux_dlms and gurux_net libraries. I am using a standard HDLC-over-TCP configuration.

My Setup:

Connection Type: TCP/IP

Protocol: HDLC Wrapper (InterfaceType.HDLC)

Host IP: 192.168.1.1 -- ip is not actual ip

Port: 8080

Client Address: 16

Server Address: 1

Authentication: Authentication.NONE

i used your example driver in python and C# and simulator to, can you tell me more about how to use and how to connect and how to get data form metter or should i use your example code to connect realtime to metter

Hi, Mikko!
In file gxsetmalloc.c i found duplicate if(). Row: 8426, function: cosem_setSFSKReportingSystemList().
if (value->vt == DLMS_DATA_TYPE_ARRAY)
{
if (value->vt == DLMS_DATA_TYPE_ARRAY) //duplicate if()
{
//.....
}
}