Hi
For making connection is it possible to use HDLC interface for a TCP/IP?

Thanks
Yatin

Hello

This is Write function:(Client C#)
// Write attribute value.
public void Write(GXDLMSObject it, int attributeIndex)
{
GXReplyData reply = new GXReplyData();
ReadDataBlock(Client.Write(it, attributeIndex), reply);
}

I try to write simple data types like this but my compiler cannot compile for "Client.Write"

GXReplyData reply = new GXReplyData();
ReadDLMSPacket(Client.Write("0.0.1.0.0.255", DateTime.Now, 2, DataType.OctetString, ObjectType.Clock, 2), reply);

tnaks

Hi

We have a Siemens IM100 DLMS COSEM meter from which we tried to fetch the objects present there. Fetched objects gave four different disconnect control objects. We tried to do connect/ disconnect etc operations with several of these objects and it is working for all of these objects. Why are there four different objects? Which one of these should we be using?

Thanks
Yatin
-Siemens

Hello
Earlier we have been able to switch between Security.Authentication and Security.AuthenticationEncryption without any problem. When we needed to debug and use Wireshark to look at the DLMS data we used to set Security.Authentication, and in production we used Security.AuthenticationEncryption. But now when we switch to Security.Authentication we get the error "Connection is permanently rejected. Authentication is required". We use Gurux.DLMS version 8.5.1709.1901.

The DLMS data looks like this:

Hello,

I need to send to meter raw PDU packet (of course with HDLC header) for example

06010227C8010301

Hello,

We are trying to readout the loadprofile from a Landis & Gyr E570 (ZMY). In map tools this works fine, the only diffference is that you have to use the "wrapper". In obx we had to change the value of "UseIEC47" to true and communiction looks fine. But when we read the loadprofile the results are limited to 6 hours (24 records with sample period of 15 min).

Any ideas what could be wrong?

Hello

We are supposed to install an M-Bus heat/water meter in an electrical meter. And we need to add an encryption key to the electrical meter so that it can decrypt the data from the M-Bus meter. How can this be done with Gurux?

Regards
Helena

Can Any one suggest me how to connect from client (in my case pc) to server(meter) through serial port optical probe.
Am trying to explain how I m approaching

using
Windows 10
Visual studio2017

Hi,

Please could anyone tell me if the Gurux DLMS component supports reading from the Kamstrup Omnicon concentrator? Usually the concentrator would communicate with Kamstrup proprietary "utilidriver" headend but I believe the protocol is also DLMS/COSEM.

Does anyone have experience with such a setup?

Hi

Is it possible for the meter to send out the event of 'power failure' to client when it occurs? If yes, is it send through DATA_NOTIFICATION or through event notification api? What will be the OBIS codes and objects for such events?

Thanks
Yatin