Hello everyone,
sorry if this might sound dumb, i'm taking my first steps into DLMS and with this library in particular.

I'm trying to read some informations from my meter device, but while coding my simple app i'm figuring out i cant find a way to set some specific values.

here is how, for instance, i'm reading the LDN.
GXDLMSData ldn = new GXDLMSData("0.0.42.0.0.255");
DataType dt = DataType.OctetString;

ldn.SetDataType(2, dt);
reader.Read(ldn, 2);

where reader is an instance of GXDLMSReader

Hi, Im trying to understand Gurux.DLMS.CPP example app and have some misunderstanding.
Im run example server app and trying to read his values with Gurux Director, but for Register 1.1.21.25.0.255 Im getting empty /means nothing, not null or something that/ value. Doing Im something bad or its only missing the command "pRegister->setValue(123456)" in the server code?

Hello everybody ,

I need your help where I am working on meter based on GSM sim808. I am creating TCP session using IP , PortNumber over sim808.

So , I need your help in the following :
- Required software tools to handle DLMS Protocol.
- preferred libraries and examples to be used to handle DLMS protocol using TCP session from GSM SIM808 meter.

finally , I would like to thank you for your help

Hi,

Attempt to write a large amount of data failed

We use Gurux.DLMS.XmlClient to send the following XML:
The electric meter reply PDU is 7E A0 110303 FC 4602 E6 E7 00 C7 0141000010 B8 7E
Conversion to XML through http://www.gurux.fi/GuruxDLMSTranslator:
<ActionResponse>
<ActionResponseNormal>
<InvokeIdAndPriority Value= "41" / >
<Result Value= "Success" / >
<ReturnParameters>
<Data>
</Data>
</ReturnParameters>
</ActionResponseNormal>

Hi

We are having some problem with invalid block numbers when communicating with UDP against Kaifa meters. Here is an example of how the communication may look like:

Send: 00-01-00-01-00-01-00-1A-C8-18-30-00-00-00-0F-14-F4-C4-82-58-6B-7D-3A-CF-7B-BC-3A-D6-00-70-97-C5-73-B2

Hi,

Is there any posibility to use Gurux without HLDC on TCP/IP only?

Good morning,
I'm trying to connect to a Landis E650 meter. From Gurux-Dyrector it's ok, with manufacturer and serial number.
We have get the C++ code and compiled in a Linux machine. Now we need to connect but I don't found where to "put" the serial number or the address, and how to calculate it from serial number.
Thank you
Isaac