I have EDMI ATLAS Mk10E. how can i connect it with DLMS via Optical Port?

Hello Mikko,

Trying to connect with meter using different security settings.
Connection is ok with None, Encryption, AuthenticationEncryption.

Can't connect with Security=Authentication.
Block Cipher Key, Authentication key, Broadcast Key values are set in Device Properties - Secured Connections Tab and Security Setup object via "Update Key" button.
Using "Suite0" Security suite.

Could you give me a hint, please?

Here is exchange log:

Hello Mikko,

Seems to me that GXDLMSIECLocalPortSetupView in InitializeComponent() should be changed from
this.DefaultModeTB.Type = Gurux.DLMS.Enums.ValueFieldType.TextBox;
to
this.DefaultModeTB.Type = Gurux.DLMS.Enums.ValueFieldType.CompoBox;

In other case it is impossible to change default mode via UI

Hello Mikko,

I've used DLMS translator a lot before and this is the first time when result is not ok. Could you please take a look - is it a meter communication problem or something else?
Translator gives me a strange result while decoding following data exchange:

13450 15:56:56:800 TX:0.1.25.9.0.255 attr = 2
TX: 7E-A0-1A-02-23-61-14-A4-70-E6-E6-00-C0-01-C1-00-28-00-01-19-09-00-FF-02-00-00-40-7E

Need to provide copy option for Event Status Word 1 (ESW-1) 0.0.94.91.18.255, Currently only view option available , some time manufacturer bit goes high in this case need to save the data

Hello,

I am able to successfully connect to a SHIJIAZHUANG KELIN ELECTRIC (https://www.sinokelectric.com/) meter using the director. However, any attempt to read data throws the following error: “GetObjects failed. Insufficient memory to continue the execution of the program.”

Any assistance in resolving this error would be greatly appreciated. Thank you.

Find my log export below:

Hello Mikko,

I'v got error window (one word only - "Index") while trying to view PushSetup.

A little bit investigation in source code shows that OnValueChanged and OnAccessRightsChange in GXDLMSPushSetupView.cs cycle through arg.Index from 2 to 4 only, throwin an exception for anything else.

At the same moment, data received from meter contains total 13 attribute index fields, as described in blue book 4.4.8.2 push setup class id 40, version 2 description.
So it seems Push setup IC description extended some time ago.

Hello Mikko,

I'm sorry for creating almost identical topic, it's because I'm unsure whether you are following all topic comments or new topics only.

The question is do you have some plans to implement UI ability to change permissions and weightings table values for Arbitrator class.

Best regards, Andrew

Hi
I have connected the meter RS485 to PC USB port via Rs485-USB convertor.

The virtual port is created by PC and it is listing.

But Director shows error "Device doesnot exists was specified"

Genus meter is connected and the same can be read thru Director thru Optical port.
Any help in this regard is appreciated

I need to connect smart meter with DLMS director,using rs485 protocol, so I am trying but its not working ,any link how to get data ,in public mode using rs485