Hello, I am trying to communicate with the ZIV meter through a serial port with an optical probe but I can not get the first sign of life.

Could you tell me the configuration that I have to have? I have seen the initial settings on the page but none of the ziv

Thank you

Hello,

I am implementing the ImageTransfer ( IC = 18 ) into a smart meter.

The problem I found in Gurux DLMS Director is with the codification of image_block_transfer method when the image_block_size does not fit into a single HDLC frame.

When using a larger block, i.e. 128 bytes, HDLC segmentation is ON and then the transmitted packet by Gurux is incorrect.

Consider the following packet:

Hey there....
I use this long list of objects, stored in a file.
No longer DLMS Director can properly load it.
Here what i got (see picture) as soon as i click any objects in the tree.
The error translates as: "Reference doesn't point to object instance"

Gurux, any help fixing this?
I dont wanna fill my list manually from scratch.
(The device does not implement Application Association.)

BR

Hello,

I am trying to connect to a HEXING HXE310-KP electric meter over serial (RS-485). I have a MAX 485 module connected via USB.

Despite using the initial settings as specified here, all attempts to connect fail with error message "Failed to receive reply from device in given time".

What could be the problem?

Hello!!

I´m trying to read the Landis + Gyr E450. But I don´t know where to set the right parameters.
The meter is connected serial to the Gurux GXDLMSDirector Version 8.1.1901.1601 running on Win10 64Bit.
I got the authentication and the encyrption-key from my gridoperator, but no block cipher key.
Tell me if i´m wrong, but I think the system title are the first 8 symbols of the Meterserial.
In my case it would be: ZMXi320C

Hi,

I'm able to read without problems energy profile, but there is a problem with profile billing.
When performing the read the exception "Invalid input string format" occurs.

Some logs while reading billing profile :

Hi,
I' m new to this but managed to connect my Kamstrup meter to my laptops USB using a FTDI converter connected to the meter.
I use default settings. It connect and this dialog comes up : "You need to read Association view to see all objects what the meter can offer. Do you want to do it now?"

I say Yes and this error shows in log:

bonjour,
Est-ce que je peux lire les compteurs type alpha A1800 via l'application GXDLMSDirector avec le protocol DLMS ?,
et si oui est-ce que je peux la faire via l'adaptateur série - ethernet EDW-100, c’est à dire selon l'architecture suivante
compteur--> convertisseur série /ethernet --> Pc connectésur le réseaux ethernet ( GXDLMSDirector) ?
si vous avez des applications dans ce sens je vous serai reconnaissant

Hey,

Is it possible to decrypt the data received in Notification window with authenticated encryption ?

I faced a message error in Mac Address Setup Object, when I try to edit Mac value in edit box of GXDLMSDirector. I compile and run last versions of GXDLMSDirector and Gurux.DLMS.c library and ServerExample.

When I write a value in edit box and do enter, a message error is display, before any other command. In sequence I attached a screenshot, translating message error to English we get something like: Cannot convert an object of type ‘System.String’ to type ‘System.Byte[]’.