Hi, I am unable to communicate with the HEX110 through the optical port. I receive and error message, I appreciate a lot if you can help me with the problem (Is a parameter error? ) .
Thanks and regards
Alejandro

Hi,
I've managed to connect to the meter on the optical interface but I cannot do the same connection on the RS232 interface. Would someone managed to do this connection and can help me with information about settings, cable pinout, etc?

Thank you,

Arian

Hi,

just using a python script to access the Kaifa MA309 smartmeter using a serial RJ12 cable with an FT232 USB device on an armbian using python 3.7

Hi Mikko,

could you please tell me why I can not set the clock time or the timezone?

Meter Type:
Landis & Gyr E450 DLMS Idis
Authentication is LOW level.

Am I doing something wrong?

Thank you and best regards,
Manuel

Hello,
I am new with DLMS.Any help would be great !!
I am trying to read data from L&T smart meter(Manufactured by:Schneider Electric india pvt ltd)) using optical cable.
I get response for SNRM Frame, but there is error response in AARE when i send the AARQ Frame.
The password is correct,i have been ensured by the manufacturer as well as the list of default password as documented by gurux.

Dear Mikko,

We are facing some connection issues with Genus three phase and signle phase meters.

As per the Gurux DLMS director the first command to be sent is the disconnect command

Command:
7E A0 07 03 41 53 56 A2 7E

Response:
7E A0 1E 41 03 73 8E 7F 81 80 12 05 01 80 06 01 80 07 04 00 00 00 01 08 04 00 00 00 01 53 3B 7E

But some times (actually on 4 different occassions) we don't get a response back for this command at all and we don't know what can be done to get a response back and get to start the communication.

Hello,

We are able to read the meter serial number of our meter and see it on the DLMS director (See screenshot attached) but when we go through the log we cannot see the serial number.

If the serial number is 3956611 what is the exact data that we should search in the log file?

I have a need to read DLMS data from a meter from Genus (picture attached). It also has a RJ11 to RS232 (male to male) cable accompanying it with which the AMR connects and can read the DLMS data. Unfortunately I do not have access to the AMR.

Though I am good with RS232 communication, I do not have much idea of DLMS protocol and thus am unable to read the meter. I have tried sending the standard "/?!" to the meter directly using terminal but of no use. I even tried combinations to baud rates (300, 9600), stop bits, partiy etc. but to no avail. Need your help on this

Hello,

I need to read Load Profile in ALPHA1830 meter but I can´t find it in Profile Generic List. Only Billing Profile and Event Log are available. Is it possible to add Load Profile object in the meter? This meter is supposed to include Load Profile but is not available.

I attach a Gurux image of Profile Generic objects.

Thank you.

Hello,

We are using HPL Three Phase meters and tried to read it using the 'Indian standard' option of the Gurux DLMS Director but we were only able to read logical name and serial number. Looks like we are not able to read the other parameters because the password is not there for a low security authentication!

The screenshot of the parameters that we are able to read is attached here

No other parameters we are able to read.

Can someone advice on how to read the same?