I updated DLMSDirector to version 9.0.2210.0401 and didn't find the manufacturer ACE (Actaris Electricity). I am updated manufacturer database. Did not help. What happened? I can't read Actaris SL7000 now (((
When I load the saved profiles, it says that it does not find the ACE manufacturer.

Hi Mikko,

There're some situations which I hope you can help shed some light.

Scenario 1:
Our meter is connected to a serial port of a transparent router/gateway/concentrator device.
This device is connected to a computer that is running a Gurux Director program.
The meter's Device Address is set as 1. The Physical Server Address of the Director is also set as 1.
We can read the data and registers etc of the meter.
No problems here.

Hi Mikko,

I have an issue whereby I am able to connect to the meter without issues at Low level authentication method, but as soon as I go to the next level (High) and try to connect, the following error appears, do you know what would cause this error ?

Please see the trace below, thank you

Hi Mikko,
We are facing some issues with reading m-bus meters through dlms using m bus client object.
Our requirement is to connect the Hydrus m bus water meter to Iskra AM550 mode, (4 mbus meters can be connected and for each m- bus meter 8 registers can be configured).
The problem we are facing is adding the registers (M bus DIF/VIF. The capture definition object is showing some extra fields to be filled with Data, and Type other than value information and data information field in the GuruX Mbus capture definition screen.

Hi guys,
I'm having trouble reading Actaris SL7000 meters. I get no response to the SNRM request.
I tried to consult the configuration tutorial but with the latest versions of the DLMSDirector the authentication schemes was changed.
Anyway I tried all the combinations but without success.
I also wanted to try to enter the serial number but the address type entry for this manufacturer only has the "Default" entry are available.

Thank you

Hi guys,
I was trying to use the DLMSDirector to access a CEWE Prometer W via Terminal.
If I try to connect to the meter without any authentication I can download the DLMS/COSEM configuration but I only get the following values:
0.0.40.0.1.255
0.0.42.0.0.255
1.1.0.2.0.255

If, on the other hand, I try to log in with authentication to access for example at the load profiles, I do not get any response to the AARQ request.

Hi~!
When I use Gurux DLMS Translator to analyze PUSH data the following happens:
1: 00 01 00 01 00 66 00 19 E0 80 00 04 00 00 12 E7 0B 01 03 0A 1E 00 00 FF C4 00 11 80 06 00 00 00 00
<WRAPPER len="15" >
<TargetAddress Value="1" />
<SourceAddress Value="66" />
<PDU>
<GeneralBlockTransfer>
<!-- Last block: True -->
<!-- Streaming: False -->
<!-- Window size: 0 -->
<BlockControl Value="80" />

Hi

Can you please provide me the installation procedure for DLMS Director in windows/ubuntu?

Best Regards
khaleel

Hello Mikko,
I have bumped into problem with access rights.
For simplicity we can focus on class Association LN, attribute 10- UserList.
I have Installer/Maintainer association (instance 0.0.40.0.3.255) which has NoAccess to its own UserList.
I have Management association (0.0.40.0.1.255) who has authenticated read/write access to Installer/Maintainers UserList.
I connect as Management client and do refresh (F5) of its object list.

Hello, I am unable to install Gurux DLMS Director into a fresh OS installation.

I am receiving the following, .NET Framework 4.8.1 is installed.

PLATFORM VERSION INFO
Windows : 10.0.19044.0 (Win32NT)
Common Language Runtime : 4.0.30319.42000
System.Deployment.dll : 4.8.9037.0 built by: NET481REL1
clr.dll : 4.8.9037.0 built by: NET481REL1
dfdll.dll : 4.8.9037.0 built by: NET481REL1
dfshim.dll : 10.0.19041.1 (WinBuild.160101.0800)