Hi Kurumi,
I tried to show Compact data object (IC=62) in DLMSDirector. But only first row (list of captured objects) is displayed. I expect that values of captured objects (presented in response) will be showed on the second line, similiar as in case of profiles. What shall I do to see also the values of captured objects ?

Attachment : screenshot
Thank you in advance.
BR,
Zdenek

I work as tester in IT company, and we're creating electrical things, for example modems. I want to learn a bit about protocols etc. and then I noticed here are python dlms libraries etc. But, for now, I'd want to try DLMSDirector to check some things. But, how can I connect? Our modem is not on Manufacturers list.
All I have are imei, s/n, modem's IP/PIN etc. Modem's type is SIMCOM. Would it be possible to connect to my modem using DLMSDirector any way?

Hi Mikko,

With GXDLMSDirector, I want to connect to an ISKRA AM550 meter using optical probe, here are my command line parameters :
-S COM8:9600:8NoneOne -i HdlcWithModeE -c 100 -s 145 -d Idis -w 1 -f 128 -t Verbose

The meter seems to send me responses, after that I don't understand why the connection fails :

Hi, hope you are doing well.I use Dlms director to connect with my kaifa Am206d, in order to get access to secured data by setting the authentication to highGMAC and using encryption and authentication key.The point is when i start the connection, all parameters from AARQ and aare are guaranteed but i struggle to to pass the invoke reply to hls authentication method with this error."Invalid password: Server to Client challenge do not match". may i get your help
here i share with you the log file.

Hi
I'm using Gxdlmsdirector for set/get my electric meter, first of all thanks for your free software , its great.
now i want use Pre-Established client to set clock in GxdlmDirector
but i cant set parameters in Gxdlmsdirector , i can use Public/Reading and Management , But i cant use Pre-Established client , how should i do the settings?

thank you.

Hi Im trying to read STAR meter and error "value are too large or too small for int16" popped out. Pls help.

This is the log in hex:

Please help me, I can't connect to the meter via rs 485 gives an error bar code of the meter 311102329 tell me what I missed? what am I doing wrong ?

Hi Mikko,

I don't understant why I'm not able to write a new value (ex: 0.0.22.0.0.255) for HDLC destination address in cosem objects 0.0.25.9.0.255 and 0.4.25.9.0.255. There is no problem when we set an IPV6 address with service=Tcp.
The meter response says "Hardware fault" :

Hi Mikko,

I have a question about "Gateway" feature I can see in GXDLMSDirector and I see some pieces of code in gurux.dlms.java that refers to a GATEWAY protocol.

Can you please give me some details to understand how it can be used, and what sort of usecases it covers , I'm interested.

Thanks !

Best Regards,
Mansour.

Hi community,

We are starting with DLMS with our Iskra meter.
The connection with a MT382 works perfectly with GXDLMS Director and we can get data from the meter.

I read the doc but I can't find the answer to theses questions :