Hello,

I have tried many times the connection to EMH LZQJ-XC meter but every time the following error appears:

Hi.
I am trying to connect to the CCC Module interface but only get a error message.
I am using Gurux GXDLMS Editor version 8.0.0.20

Hi,

I am trying to connect GuruxDirector with Landis+Gyr DC450 Data Concentrator and read data from several meters. May I know whether it is possible with the GuruxDirector or not? I have tried to connect, but the Data Concentrator is rejecting the connection.

Thank you in advance for your help :)

Hi Gurux,

error while loading the profile of "Failed to receive reply from the device in given time"

the log file is here http://pastebin.com/nfs9QWKi

In version 8.0.0.11 no errors

Using various optical heads (Silecon, Profilic)

Dear Gurux

i have Actaris SL761A071, and using default intial setting with low authentication :

GXDLMSDirector Version :8.0.0.20 (Running at Windows 10 64bit)

Manufacturer: Actaris Electricity
Media : Serial
Auth : Low
Logical Name referencing : Checked
Password : ABCDEFGH
Wait Time:20
Client Addr:1
Physical Server:11
Logical Server:1
Port Name:Com8
BaudRate:9600
Data Bits:8
Parity:None
Stop Bits:1

Hi

I am trying to connect the DMTZ-XC from EMH via LAN RJ45.
After sending the SNRM I get no reply and Director runs in a timeout.

Manufacturer Settings:
Use LN: no
User IEC 62056-47: no
Interactivity Mode: KeepAlive (interval 40, no force)
Start Protocol: DLMS
Authentication: None
Client Address: 10
Server Address Type: SerialNumber Formula: SN%10000+256
Physical: 1 Logical: 0

I am trying to install GURUX GXDLMS Director version 7.0.40.1. After installing it whenever i go for tools/manufacturers it gives me the exception . The screenshot of the exception is attached .

If I change the physical and logical server IDs I find the with some settings DLMSDirector sends the blocks of window and maximum message lengths, and with some settings it doesn't. An example is with physical server set to 1 and Logical server set to 0 I get:
7E A0 07 03 21 93 0F 01 7E
but if I change physical server set to 0x100 and Logical server set to 1 I get:
7E A0 17 00 02 04 01 21 93 F1 2E 81 80 08 05 02 00 80 06 02 00 80 F8 85 7E
Surely the information should be sent whatever the addresses are set to?

after the connection, when i read i have the error System.IndexOutOfRangeException

The meter id SAMGAS RSE 2,4
This is the log.