Hi Mikko, All,

I'm having some troubles during setting meter at Object-CF9.

I tried to set CF9 by "CompactData->0.0.66.0.9.255" in GXDLMSDirector.
But only "Spare Object" reports a success. All other Obis reports an "UNMATCHED TYPE" and they cannot be set as I want.

Am I missing something and/or is there a different approach to make the trick?
Thanks in advance for your kind feedback.

Regards,
Walter

I connect to the meters via IP dlms (CU-L52 and CU-B2) and I get the message: No connection could be made because the target machine actively refused it.
What is the problem or what are the settings of both meters?
I use the serial numbers, but what do I do with physical address, logical address and useLogicalNameReferencing?

Hi,

hi,
i want to connect to a meter but i cant do it,
the message from the trace are the following:
11:41:57 11:41:57.008 Info Opening
11:41:57 11:41:57.008 Info Serial Port Settings: Port Name: COM2 Baud Rate: 9600 Data Bits: 8 Parity: None Stop Bits: One Flow Control: None Eop: None
11:41:57 11:41:57.020 Info Open
11:41:58 Send SNRM request.
TX: 7E A0 1E 03 21 93 CD 3B 81 80 12 05 01 75 06 01 75 07 04 00 00 00 01 08 04 00 00 00 01 25 9C 7E

Hi
I am use "gxActionSchedule" in C DLMS but detects invalid the object when i am reading through "DLMSDirector.exe" !?

Hi,

I am using c code from our DLMS source.
here, while reading profile generic(OBIS code: 1,0,99,1,0,255), and adding more than 6 object shows "unacceptable frame error" in gurux dierector. but less than 6 is working fine.
please give me specific details about frame generation, if it had.

traced serial data from meter is pasted below.please find it.

thank you

received data from meter

7E A0 1E 21 03 73 C3 7A 81 80 12 05 01 80 06 01 80 07 04 00 00 00 01 08 04 00 00 00 01 53 3B 7E

12:41:34.026

Hi everyone.

I am having some problems with a Landis and Gyr Prepayment/Prepaid meter (Sample Unit) E460, regarding DisconnectControl.

I can read the values from the meter, but for some reason, I cannot write a command back to it,
the image indicates the presence of the DisconnectControls.

My question is, is this a access control issue that I do not have write access to the DisconnectControl object to "reconnect/disconnect"?

BR

Hi,
I'm trying to communicate with a meter ( Elster themis-uno EI6) in DLMSDirector.
With authentication "none" I have some response, but i can't reach obis for current index and many other needed.
Using authentication "none" and at the tab secure connection using "encryption" , system tile ( client system tile for management 8 bytes) , block cipher and authentication key same hex code for this specific meter , I get an error "Connection is permanently rejected . Authentication failure"

I have lots of parameters that i want to set in meter with serial port in C#.
I have
Class Name.
Data.
Class ID.
Attribute ID.
OBIS.
Data Type.
how can i do this???

After changing wifi connection during reading meter for the first time Director freezed.
Peter.