When the access right of object is AuthenticatedRead or AuthenticatedReadWrite, press "Read" button can not read anything.

Hi,

i can connect to the E450 Prime meter (L&Gyr) and even read it but where does it show the actual meter readings? I did not put any password anywhere. Do i need some password? This meter is in Spain. See screenshot attached

Hi,
I'm trying to read Polish Apator meter via Gurux Director with no success. The meter is available via public ip address. Maybe anyone connecting via Gurux to this meter? Data to connect which provider send to me are:
Manufacturer identifier : APAESX30
Authentication: High
Password: 01234567

Serial number and address ip with port.

Hi, Mikko!
I updated DLMSDirector to version 8.2.2112.2101.
After it does not show read data.
For example i try read Data (0.0.96.1.2.255). It contains octet string "1A2B3C".
Request:
7E A0 1F 03 61 54 A3 D3 E6 E6 00 D9 C0 00 00 05 00 01 01 00 01 00 00 60 01 02 FF 02 01 00 5F 6F 7E
Answer:
7E A0 1C 61 03 74 7C 31 E6 E7 00 DA C0 00 00 05 00 00 01 09 03 1A 2B 3C 01 01 00 4D 50 7E

But no effect.

In version 8.2.2110.0602 - OK.

Thanks!

Hi,
In the attached picture I have configured the Physical address as 849. But, I am not able to understand how the server address is coming as 17233 in GXDLMS director. Can you pls tell me how this is calculated?

Please help.

Thank you.
Ayush

Hello,

We are trying to communicate with L&T ER300P with the GuruX DLMS Director but are not able to do it without the Low Security Password.

Does anyone know the password?

Thanks

Hi Mikko,
I am using GuruX director v8.2.2112.2101.

I added device as US association and I could read/write all US objects as expected. But when I read IC15 object for PC, being associated as US, objects are read successfully but post read, access right of all other objects are changed as per PC association. However if I again read IC15 object for US, all rights gets restored.

Reading meter info from SECURE Premier 300 meter
Doing this using serial port on meter. Using RS232 over RJ11 port I am not able to connect to meter.
Refresh button is not active. Connections pic is attached. Am I doing it the right way GURUX.

Hi,
I'm using DLMS Translator, running from GXDLMSDirector -> Tools.
The application is very helpfull for me, but now is not possible to use it. It's falling down.
I used it in the past without problem. Mayby installation of new version ?
My version is 8.2.2112.1601

Hello, I am trying to Read by GXDirector a Chinese meter of the YTL Brand Reference DTS-353-CT / V3D, this says that it can be read by using DLMS protocol. It works with communication through RS485 2 Pins (A-B). However, using the GXDirector I have not had a response by using the RS485 Port, and I have tried with an Optical Probe and I have obtained a response using the configuration shown in the shared image.

The configuration for probe communication is the following in my case:
Port: COM4
Baudrate: 9600
DataBits: 8
Parity: None
Stopbits: One