Hi!

While using the DLMSDirector, I noticed something that I think might be a bug. I thought I'd submit a patch for it but I wanted to check with you guys first.

These are the steps:
Devices -> Add new device -> Media: Serial

Now, if I select 'DLMS' here, the 'Advanced' button is enabled. However, if I select 'IEC', it isn't. As far as I know, changing the baud rate when running IEC1107 shouldn't really be a problem, right?

sir,

I am working with GXDLMS Director.I dont know ,how to set manufacture id in the meter for hdlc profile.please help.

Hi.
As a Application (client by DLMS) know what devices (server by DLMS) are connected, if the initiator connection is a device with a built-in GSM modem mode GPRS (powered by lithium battery) with a dynamic IP address (protocol TCP/IPv4)?
In my opinion, the solution may be as follows:
1. After tcp_established the first request from the “Data Collection” SERVER (client by DLMS) SNRM should be empty (ID server by DLMS) (No-station - 0 or All-station (broadcast)-0x3FFF);
2. From the device as CLIENT (server by DLMS) must sent to the identification packet with address for next step.

Hello,
When reading a meters Landis + Gyr zmd310 and others (zmd410, zmd405 and zmg310) everything ran well but I can not write.
I've followed all your instructions but nothing;
"Edit and write values ​​back to the physical device

In the left column listing, select the item, Whose value to edit, by clicking its name.
Enter the new value to the Value text field.
Press Enter.
The Value changed icon Appears
at the end of the row of the edited value, and
on the edited object data, in the Device Tree on the left.

Hello, I was trying to use Gurux DLMS/COSEM Director to connect to a meter and try
to read some data but got some difficulties:

1st Experiment:
First experiment was with an optical interface (BLUSKY) and a Landis+Gyr meter.
I added the device with the configurations:
Start Protocol: IEC, Media: Serial

Authentication: None
Wait Time: 20, Client Address: 10
Address Type: SerialNumber
Serial number: , Logical Server: 1
Serial Port: COM9, The configurations for Serial Port, are correct.

Hallo,
I try out to read IskraEmeco MT171
Here is the LOG:

20:29:39 Initializing serial connection.
20:29:39 HDLC sending:/?!
20:29:40 HDLC received: /ISk5MT171-0222
20:29:40 Bitrate is : 9600
20:29:40 Moving to mode E.
06 32 35 32 0D 0A
20:29:40 Send SNRM request.
7E A0 07 03 23 93 BF 32 7E
20:29:58 Failed to receive reply from the device in given time.

The meter is accepted, but there are no readings.

What can I do?

Hi,
there is a way to install this media on DLMS Director?

Thank you very much