hi,
I am not able to build this project and as a result i am unable to get the .exe file , please guide me.

Hi,

I have managed to get the Push packet with Data Notification Service packed under general global service and got following output at G-Director Notification Viewer :

<GeneralGloCiphering>
<SystemTitle Value="45484C3435363738" />
<CipheredService Value="20000000199D34F198285F25017869DBB742AFED2BB7E76F408E29B4CF2D786F2C69A76B8EEDC64EE917FB7BB1172C566C4E32DFCC73CAFEE41C638ECE692F87A115F859A3FDDAAC63EEE6282353C1665D" />
</GeneralGloCiphering>

Hi!
Using DLMS Director I can connect to CEWE Prometer 100 on TCP/IP using the settings in the attached image "Standalone.png".

Then (a customer) has setup 2 Prometer 100 on a RS485 bus for us, and given us this information:
Meter 1 serial no: "WP010869", MBUS address: 17
Meter 2 serial no: "WP016186", MBUS address: 16

Hi,

Can i run wrapper protocol on serial port?

Thanks in advance

Hello ,
I am using Gurux Arduino server code on Arduino Mega. It seems that server code is at default none authentication. When I try to read from arduino server on Gurux DLMSdirector , it does read only association logical name as expected.
Now, I want to use server code at low authentication so that I can read other objects on DLMSdirector. I tried using low authentication as given in GuruxDLMSServerExample, but I am not even getting response of SNRM frame. I have put correct initial settings before connecting.

Hi,

I want to read linyang meter with low security do you have any default setting for the same.

Thanks,
Hajikhan

Thanks for your attention, We connect SL761X071 Meter through Serial port RS232, configured 9600 8N1None, with Initial Settings like File, please may you tell us how to access with write privilege?

Let's discuss GURUX tool installation and usage issues.....
Can anyone let me know how to write ToU (time of use).

According to Blue book following steps are required for image transfer.
1.Check if image transfer is enabled
2.Get image block size
3.Initiate image transfer (Individual or broadcast)
4.transfer image by blocks
5.verify completeness of image transfer

Hello,

For the COSEM Application tests in the GXDLMSDirector, can we know what these tests cases are?

However, testing my meters the COSEM Application tests failed, and I really can tell why? See log below