Forum Rules

Before commenting read Forum rules

Don't comment the topic if you have a new question.

You can create a new topic selecting correct category from Gurux Forum and then create a new topic selecting "New Topic" from the top left.

Description

Questions and comments about DLMSDirector.

Image
By PhysicsLow , 29 May, 2020

Omnipower 2 RS485 GMAC Maintenance Role

Forums
DLMSDirector

Hi

I would highly appreciate if you could make me a bit wiser...

SITUATION
I try to connect with GXDLMSDirector to a Omnipower 2 meter on RS485.
-Connection with public association works fine
-Connection with LLS works fine
-Connection with GMAC (Maintenance Role) fails. See below.

QUESTIONS
--Do you agree on my choice for <SystemTitle>4B414D4501E904D2</SystemTitle> ?
--I did not specify any Password. Where does <Password>mR3Vs57qW5rOSoeFK50bdw==</Password> come from?
--Any hints what went wrong?

By anudeep02 , 29 May, 2020

Unable get response for "Read" request

Forums
DLMSDirector

I'm using Gurux DLMS Director to test my smart meter code having dlms functionality. i'm using STM32 micro controller. The steps I followed:
1) I added device, with manufacturer as "Saudi Electricity Company", start protocol as DLMS, logical name referencing, low level authentication and added respective details.
2) I'm testing my meter for Serial(RS485) port, so added COM port and baud rate with rspective details.
3) After adding all the details, I tried to connect with meter. Connection is formed.

By deepaks , 29 May, 2020

Push Interpretation at Director

Forums
DLMSDirector

Hi,

I have managed to get the Push packet with Data Notification Service packed under general global service and got following output at G-Director Notification Viewer :

<GeneralGloCiphering>
<SystemTitle Value="45484C3435363738" />
<CipheredService Value="20000000199D34F198285F25017869DBB742AFED2BB7E76F408E29B4CF2D786F2C69A76B8EEDC64EE917FB7BB1172C566C4E32DFCC73CAFEE41C638ECE692F87A115F859A3FDDAAC63EEE6282353C1665D" />
</GeneralGloCiphering>

By Karl , 26 May, 2020

Cannot connect to CEWE Prometer 100 on RS485 bus.

Forums
DLMSDirector

Hi!
Using DLMS Director I can connect to CEWE Prometer 100 on TCP/IP using the settings in the attached image "Standalone.png".

Then (a customer) has setup 2 Prometer 100 on a RS485 bus for us, and given us this information:
Meter 1 serial no: "WP010869", MBUS address: 17
Meter 2 serial no: "WP016186", MBUS address: 16

By iomkar , 25 May, 2020

Unable to get response from Arduino Mega on DLMS director

Forums
DLMSDirector

Hello ,
I am using Gurux Arduino server code on Arduino Mega. It seems that server code is at default none authentication. When I try to read from arduino server on Gurux DLMSdirector , it does read only association logical name as expected.
Now, I want to use server code at low authentication so that I can read other objects on DLMSdirector. I tried using low authentication as given in GuruxDLMSServerExample, but I am not even getting response of SNRM frame. I have put correct initial settings before connecting.

By NELSON GONZALEZ , 21 May, 2020

SL7000 Read

Forums
DLMSDirector

Thanks for your attention, We connect SL761X071 Meter through Serial port RS232, configured 9600 8N1None, with Initial Settings like File, please may you tell us how to access with write privilege?

DLMSDirector