Good afternoon Kurumi,

I'm trying to connect to Hexing HXE115-KP with Gurux GXDLMSDirector Version 9.0.2506.2601.

The IEC62056-21 protocol handshake is executed successfully.

I have a doubt about the scalar part in the profile generic class. In the block load profile, for the voltage parameter, there is no decimal point displayed in the UI. As I have given the scalar part in the Scalar: block load profile parameter.

Hello Mikko,

Current Association - > General tab ->Update High password results to new password sent in non-ciphered way.

Is there any way to cipher password to be set?

Hello Mikko,

How should I fill in 'day of week' value in Daylight savings begin/end fields, clock object?

As written in blue book "4.1.6.1 date and time formats examples":

"2) year = 0xFFFF, month =0x FF, dayOfMonth = 0xFE, dayofWeek = 0x07: last Sunday in every year and month;"

so where should I use "7" value in that field?

Best regards, Andrew

I have made a configuration on "Register Activation" class but attribute index data 3 is not visible on GxDLMS Director. Instead of data it is showing following system Generic list as

 System.Collections.Generic.List'1[System.Collections.Generic.
KeyValue2[System.Byte[].System.Byte[]]]

 System.Collections.Generic.List'1[System.Collections.Generic.
KeyValue2[System.Byte[].System.Byte[]]] 

Tariff log of all attribute index are (rest attribute index data is visible on GxDLMSDirector screen) as 1

Hi

I want to Know while reading data from meter do we need to apply the scalers to the meter data separately or else gurux will automatically apply scalers to the meter data.

Please clarify this doubt.

Thanks

Yamini

I am using a Holley DTS545 smart meter. How can I add objects manually with OBIS codes? And how can I know it's working?
I attached OBIS codes of my meter's objects.
https://www.dropbox.com/scl/fi/0bq4qr4mszqs2m1fdq582/Screenshot-2025-07…

Hi,

I am trying to connect to a Sagemcom T-210D using Suite 1 (AuthenticatedEncryption) and HLS-5 (HighGMAC).
I could successfully import the client certificate using the public client, however, logging on to the management client fails.

Hello Mikko,

As written in blue book 4.5.4 Special days table, methods insert/delete are optional. Gurux DLMS Director Add/Remove buttons in special days table objects unavailable for selection if methods insert/delete are not realized by meter manufacturer.

Is it possible to add Director functionality to modify Special Days table via ordinary set/get request?

Best regards, Andrew

Dear kurumi,

Hope you are doing well.

Excited to become on forum after long time it's around 2.5 years.

I am developing indian standard and for that i have implemented firmware upgrade association but gurux gives error on object list downlow.

Error : Index was out of range. Must be non-negative and less than the size of the collection. Parameter Name: Index