Hi
I m try to connect L&T ETV meter (ER300P) With GXDLMSDirector and using serial communication RS232
But give error message " Failed to receive reply from device in given time "

What's the problem...?

Hi team,

we are using macros to automate a sequence of commands, and we would like to insert a delay between some consecutive actions, is it possible? Can I edit a macro file to insert a command like "delay", "sleep", "wait" or something similar?

Best Regards,
Fernando

Hi!

After update to GXDLMSDirector 8.2.2112.2101.

When I try read from meter any data (for example object Clock with obis-code 0.0.1.0.0.255) I get PUSH-message from meter. But this message put into "Trace TextBox" and application get me Error Message "LLC bytes are missing from the message" and data not receving.

Before update i don't have any problem with DataNotification.

Please check this problem. Thx for help

When the access right of object is AuthenticatedRead or AuthenticatedReadWrite, press "Read" button can not read anything.

Hi,

i can connect to the E450 Prime meter (L&Gyr) and even read it but where does it show the actual meter readings? I did not put any password anywhere. Do i need some password? This meter is in Spain. See screenshot attached

Hi,
I'm trying to read Polish Apator meter via Gurux Director with no success. The meter is available via public ip address. Maybe anyone connecting via Gurux to this meter? Data to connect which provider send to me are:
Manufacturer identifier : APAESX30
Authentication: High
Password: 01234567

Serial number and address ip with port.

Hi, Mikko!
I updated DLMSDirector to version 8.2.2112.2101.
After it does not show read data.
For example i try read Data (0.0.96.1.2.255). It contains octet string "1A2B3C".
Request:
7E A0 1F 03 61 54 A3 D3 E6 E6 00 D9 C0 00 00 05 00 01 01 00 01 00 00 60 01 02 FF 02 01 00 5F 6F 7E
Answer:
7E A0 1C 61 03 74 7C 31 E6 E7 00 DA C0 00 00 05 00 00 01 09 03 1A 2B 3C 01 01 00 4D 50 7E

But no effect.

In version 8.2.2110.0602 - OK.

Thanks!

Hi,
In the attached picture I have configured the Physical address as 849. But, I am not able to understand how the server address is coming as 17233 in GXDLMS director. Can you pls tell me how this is calculated?

Please help.

Thank you.
Ayush

Hello,

We are trying to communicate with L&T ER300P with the GuruX DLMS Director but are not able to do it without the Low Security Password.

Does anyone know the password?

Thanks

Hi Mikko,
I am using GuruX director v8.2.2112.2101.

I added device as US association and I could read/write all US objects as expected. But when I read IC15 object for PC, being associated as US, objects are read successfully but post read, access right of all other objects are changed as per PC association. However if I again read IC15 object for US, all rights gets restored.