Hello,

I am reading an electricity meter with the following structure:

class charge, attribute unit_charge_active, element commodity_reference with a logical_name of 1.0.15.8.0.255 (Total energy).

Reading with Gurux, in the section Commodity Reference Type, field "Target" remains empty. Expanding the field "Target", there are the only references to the Credit instances.

Hi Mr Kurumi, please what's the initial settings for Shenzhen CLOU electronics meter.
Thank you for your help.

Hi,
I'm trying to read DTS-353/100A/V4D from the YTL manufacturer (Zhejiang Yongtailong Electronic ,Co., LTD). I don't have any manual and couldn't find it on the internet.

Using the HDLC Address Resolver I could establish a connection to the meter using the RS485 serial port with the following configuration:

Interface: HDLC
Logical Name Referencing
Authentication: None
Client Address: 16 (decimal)
Address Type: Default:
Logical Server: 10 (decimal)
Physical Server 9058 (decimal)

serial 9600-8-N-1

Hello,

Is it possible to implement in Gurux DLMS Director the interface class IC = 116 ( IEC 62055-41 ) ? You can find in the blue book 15.

It is related with STS prepayment protocol. I have a meter that I want to validate the implementation of class IEC 62055-41.

Thanks.

Dear Forum,

I have a new Meter that I want to test.
Now I am trying to connect via optical probe, but in the end it should be read via TCP/IP Connection and Cellular modem.

I can read the Meter with the public Client, but LLS and HLS is not working.

Is it a configuration problem or is the meter behaving differently than expected?

NOT Working LLS:

Hi Mikko,

When I am working with the DLMSDirector, but also my own testcode, I encounter a weird issue.

My meter has load profiles that have no capture objects from factory. Therefore, I am adding this myself via DLMS. Adding, and removing is figured out in both the director and testcode.

However, when I want to remove all capture objects from this originally empty list. I get an error message. The error only occurs when want to remove the last item in the list. When we go from a list with 1 or more capture objects to and complete empty list.

Hi

I have an HXE5\2HXF300 meter and I can connect but don´t read association view.

Negotiated:
BlockTransferWithGetOrRead, BlockTransferWithSetOrWrite, Get, Set, SelectiveAccess, EventNotification, Action

I try to read any objet (Ex: 0.0.1.0.0.255) without sucess.
Response is "Access Error: Read-write denied"

Command line with -v "0.0.1.0.0.255" return "Access Error : Device reports a undefined object."

Any idea?

Hi Mikko, in this topic: https://www.gurux.fi/forum/16758 you mentioned that Wasion aMeter100 is compatible, I have a unit here but I tried several addresses/configs and didn't have any luck on trying to connect to it. Can you share what settings this meter uses for default? Thanks

Hi, Sir

I'm trying to implement gurux arduino to retreive data from Itron meter via RS232 port. After some tweaking on few parameter, finally I can connect to the meter and read several info.
Currently i'm using DLMS_AUTHENTICATION_LOW for authentication with some password and DLMS_INTERFACE_TYPE_HDLC

The question is why I'm only getting this two parameter. which is logical device name and clock. I haven't modify anything from sample code except the initialization.

I have issue we’ve encountered with the GuruxDLMSTranslator tool. Specifically, it seems that the Data List is missing from the GetResponseWithList function.

C4 03 C1 02 00 09 0C 07 E8 09 15 06 14 2D 2C 00 FE 5C 00 00 10 FE 5C