Skip to main content
Home
for DLMS smart meters
Open source solutions for DLMS smart metering

Main navigation

  • Home
  • Products
  • About us
  • Open Source
  • Community
  • Forum
  • Downloads
User account menu
  • Log in

Breadcrumb

  1. Home
  2. Node
  3. Push Setup
Profile picture for user Administrator
By Administrator , 23 January, 2018

Push Setup

Push setup defines which object values a device sends automatically, where it sends them and how delivery is retried. It supports event-driven reporting without a separate read request for every value.

When to use it

Use it to send a daily reading or an alarm report to a collection server.

Use Auto connect when the meter must establish a connection for the collection service to perform subsequent reads, rather than only delivering selected values in a push message.

Attributes

1. Logical name

Identifies this object instance using its six-part OBIS code. Use it to distinguish this object from other instances of the same class.

2. Object list

Lists the objects, attributes and optional element selections included in the push message.

The receiving application needs the capture list to interpret the values. The existing Gurux guidance recommends including the Logical Device Name to identify the sender. A push can include its object-list attribute as self-description, or identify the Push setup instance so the receiver can use a previously known capture list. Including the full list increases the message size.

3. Send destination and method

Defines the transport service, destination address and message representation.

The available destinations and transports depend on the meter. Some implementations send to a configured network address; others use an existing connection.

4. Communication window

Lists the time windows during which push communication is allowed.

5. Randomisation start interval

Sets the maximum initial random delay in seconds, helping spread traffic from many devices.

6. Number of retries

Sets how many retries may follow an unsuccessful attempt.

7. Repetition delay (versions 0-1)

Sets a single delay, in seconds, between push delivery attempts.

7. Repetition delay (version 2)

Defines the minimum delay, exponential growth factor and maximum delay used to schedule successive push delivery attempts.

8. Port reference

References the communication port used for the push.

9. Push client sap

Specifies the client service access point used for the push destination.

10. Push protection parameters

Defines the security protection applied to the pushed data.

11. Push operation method

Selects the push delivery and confirmation behavior.

12. Confirmation parameters

Defines the timing parameters for confirming a push.

13. Last confirmation date time

Records the date and time of the most recently confirmed push.

Versions

Version 0 provides attributes 1-7. Version 1 adds attributes 8-10. Version 2 adds attributes 11-13 and changes attribute 7 to a structured retry-delay configuration.

Actions

1. Push

Trigger push message.

  • Log in or register to post comments
  • Create new account
  • Reset your password

Book navigation

  • Activity calendar
  • Association Logical Name
  • Auto Connect
  • Auto answer
  • Clock
  • Compact data
  • Data
  • Demand register
  • Disconnect control
  • Extended register
  • GPRS modem setup
  • GSM diagnostic
  • IEC HDLC setup
  • IEC local port setup
  • IPv6 setup
  • Limiter
  • M-Bus Client
  • M-Bus master port setup
  • M-Bus slave port setup
  • MAC address setup
  • Modem configuration
  • PPP setup
  • Profile generic
  • Push Setup
  • Register
  • Register Monitor
  • Register table
  • SAP assignment
  • Script table
  • Security setup
  • Single action schedule
  • Special days table
  • Status mapping
  • Tcp Udp Setup
  • Transferencia de imagen
  • Utility tables
  • Manufacturer custom objects
  • Account
  • Arbitrator
  • Array manager
  • Charge
  • CoAP diagnostics
  • CoAP setup
  • Communication port protection
  • Credit
  • Data protection
  • Function control
  • G3-PLC 6LoWPAN setup
  • G3-PLC MAC layer counters
  • G3-PLC MAC setup
  • LLC SSCS setup
  • LTE monitoring
  • M-Bus diagnostics
  • M-Bus port setup
  • Network time setup
  • Parameter monitor
  • PRIME application identification
  • PRIME MAC counters
  • PRIME MAC functional parameters
  • PRIME MAC setup
  • PRIME network administration data
  • PRIME physical layer counters
  • S-FSK active initiator
  • S-FSK MAC counters
  • S-FSK physical and MAC setup
  • S-FSK reporting system list
  • S-FSK synchronisation timeouts
  • Schedule
  • Short name association
  • STS payment token settings
  • Tariff plan
  • Token gateway
  • Twisted pair setup
  • Wireless mode Q channel
  • IPv4 setup
  • Register activation

Hire Us!

Latest Releases

  • Thu, 11/19/2026 - 10:57
    Gurux.DLMS.Python 1.0.204
  • Thu, 11/19/2026 - 10:12
    gurux.dlms.c 9.0.2611.1901
  • Tue, 10/13/2026 - 12:00
    gurux.dlms.java 4.0.97
  • Tue, 09/22/2026 - 14:02
    Gurux.DLMS.Net 9.0.2609.2201
  • Mon, 09/21/2026 - 10:18
    Gurux.DLMS.Net 9.0.2609.2101

New forum topics

  • Kaliurang Telp/Wa 082371291690
  • Money Changer Indorate Prima Javalas Itc Kuningan Telp/Wa 081930338564
  • Money Changer Valuta Artha Mas Telp/Wa 081930338564
  • Layanan KCU THAMRIN No Cs.0817 819 444
  • Arthamas Citra Mandiri Money Changer Telp/Wa 081930338564
More
RSS feed
Privacy FAQ GXDN Issues Contact
Follow Gurux on Twitter Follow Gurux on Linkedin