Twisted pair setup
This object configures communication over a twisted pair line with carrier signalling. It defines how the meter participates in the network and which addressing information it accepts.
When to use it
Use it when commissioning meters on a shared twisted pair communication channel.
Attributes
1. Logical name
The OBIS code that identifies this object instance in the meter. Use it to distinguish this instance from other objects of the same class.
2. Mode
Selects whether the interface is inactive, always active or uses a manufacturer-specific operating mode.
3. Speed
Sets the communication rate supported by the port.
4. Primary addresses
Lists the primary station addresses assigned to the device's logical devices.
5. TABi values
Lists the TAB(i) response values used when stations are discovered or called without their normal address.