Hi.
For S02 request (OBIS 0100630100FF) energy meter make answer:
.....
{0x00, 0x00, 0x00, 0x01, 0x00, 0x81, 0xF2}
{0x02, 0x08,
0x09, 0x0C, 0x07, 0xDE, 0x05, 0x0C, 0x01, 0x10, 0x00, 0x00, 0xFF, 0x80, 0x00, 0x80, //date
0x11, 0x00, //????
0x06, 0x00, 0x00, 0x00, 0x01, //AI="1"
0x06, 0x00, 0x00, 0x02, 0x00, //AE="512"
0x06, 0x00, 0x03, 0x00, 0x00, //R1="196608"
0x06, 0x04, 0x00, 0x00, 0x00, //R2="67108864"
0x06, 0x00, 0x05, 0x00, 0x00, //R3="327680"

Hi

I have 2 landis+gyr e650 devices.
My pc is connected to one landis+gyr e650 through CU-E22 using ethernet.
The first landis gyr is connected with serial interface to the second - CU-E22 -> CU-P42 - which are configured as master -> slave.
I can use DLMSDirector to connect to one of the devices - the master.
I tried setting Logical Server addres to 1, but I couldn't connect to the second device.
What's the procedure for accessing second - slave device using dlms director ?
Any hints would be appreciated.

Hello,

I see that DLMSDirector sends an empty UDP frame about 40 seconds after last communication.
My meter does not react on this and DLMSDirector closes association and displays message "cannot communicate with device in given time".

This seems to be kind of a keepalive mechanism, but I could not find it in the DLMS spec.
Is this something Gurux proprietary ? Or is there a way to disable this behaviour ?

Kind Regards,

AngMo

Hello,

we were reading data from L+G E650 while we stopped readout without closing connection and after that we are not able to establish new connection (using serial port). After trying to establish connection we get System.OutOfMemoryException . Is there anything we can do in this matter? Basically SNRM request is sent, next UA reply and next after request a very strange frame is transmitted having a lot of "01 0D". The log is as follows:

Hello Gurux team,

I am using version 8.0.1704.1901 and could not find how to interact with a meter implementing COSEM UDP transport, with WRAPPER layer.

Here is my settings :
- Start protocol : DLMS
- Media : net
- Hostname : xxx
- Host port : xxx
- protocol : UDP
- use serial port through ethernet : false

With this setting, DLMSDirector sends a UDP encapsulated SRNM frame to the specified IP address / port..
I would expect more a WRAPPER 8 bytes header followed by AARQ...

Can you tell me what the device- and the secured connection settings are for Kamstrup 162JxC with serialnumber 15162766.
The connection will be established by optical head.

Baudrate
Authentication
Client Address
Physical Server
Logical Server

Serial Port Settings

Used secure level
System title
Block cipher key
Authentication key
Invocation Counter

I have the Master Encryption Key.

Hello.
I have a Elster A1500 Meter with Serial Number 00391068
But I dont know Meter's Physical address, and I must connect via RS485 over transparent modem.
Modem IP is 192.168.2.250 and port 10001.
I'm connection Actaris/Itron modem very well wtih this configuration
Serial Number: 73032578
Physical address: 2578
Comm Options {
BaudRate: 9600,
Data Bits: 8,
Stop Bits: 1,
Parity: None,
}
Gurux Config : http://oi67.tinypic.com/11i382c.jpg

Hi

I'm trying to read an E450 Meter from Landys+Gyr with the GXDLMSDirector Version 8.0.1704.070.
I can read the meter with MAP110 so the serial settings and the used password should be correct.
For GXDLMSDirector i used the following settings:

Manufacturer: Landis+Gyr
Start Protocol: DLMS
Media: Serial
Authentication: Low
Password: (the one working with Map110)
Client Address: 11

When i try to connect i get this error:
Insufficient memory to continue the execution of the program.

This is the log:

In GXDLSMDirector, if I choose Tools->Manufacturers->[some maker]->edit, the Addressing Authentication selection box only shows the subset of authentication types the manufacturer supports. There doesn't seem to be a way to add a new authentication type to a manufacturer through the GUI. I have to exit its XML file, and add the new authentication type there.

Once the new authentication type is added in the XML, it can be configured through the GUI

Hi Mikko

I am trying to read Hexing meter i have added the manufacture and i can successfully connect to the meter.

However im getting error getObjects failed access error device reports a unavailable when i try to read

Please see logs below