anyone can describe this info to gurux dlms director?

Hi everybody,
I am writing to ask you if you too have had the same problem with the connection to this type of machine (I am attaching photo1). I use an infrared port connected to a pc. I set gurux as Italian standard and started reading. I read in some other post that he had to create a new manufacture using the Italian standard settings but changing the machine name to EDi, but still I have the same problem.

Hi
I found a issue in indian standard mode, 15959 explained that in LLS data transfer only using the encryption, only during AA eatabishment using authentication and encryption, but now version, DLMSDirector only have select item for all the stage(means AA and data transfer). so we have below issue
in MR association. could you check the issue, thanks!

Has anyone used this meter?
I have tried multiple presets and configurations with DLMSDirector - no response.
However I'm not even sure if DLMSDirector can support this meter. As far as I can translate and understand it is IEC 62053-21? Which might be a monophase version of 62056-21?

I've also tried sniffing out the communication between it's program "S0-Recorder" with no success. Possibly because it involves changing baudrates.

Hi

After the latest update we are facing issues while downloading the object list. The object list gets downloaded but from the downloaded list ProfileGeneric objects are missing. We are able to open previously saved .gxc file and read profiles, but these objects go missing when we download the object list.

Regards
Shanthi Bandreddi

Hi Mikko,

I am using the IS15959-2 Indian standard meter for testing.
Using GXDLMSDirector, I read Clock from the meter.

Current time zone of India is +5:30 (i.e 330 min), Which is set in meter.
From the Advanced tab in Director, I have not selected any checkbox for time.

The value of time is shown 11 hrs ahead of the meter time. When I select use meter time zone from View tab it is shown proper time.

Can we have this change in the GXDLMS.Net library without use meter time zone selection?

Hello,

I am trying to connect Itron SL7000 meter via DLMS Director. I am using Utility RS232 port and Moxa UPort 1150 device for this. You can find wiring diagram at attachment.

I tried default parameters (None auth. and Low auth.) but it not worked. I also tried some parameters that I found in forum. You can find my parameters at below.

Hi Mikko,

I want to write to the 0.0.94.91.18.255 (Event Status Word 1 (ESW-1)) object, but am unable to change the bits by clicking on the checkbox as I am getting the following error:

See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.

Hi,

I wanted to install GuruxDLMSDirector on my Laptop. I have already installed .NET 6.1, still while installing Gurux I am getting the error
"Application can not be started. Contact the application vendor"

I am attaching an error screenshot for your reference.

HI,

I am trying to use Gurux Director to download a DLMS meter via an optical probe connected to the serial port. In the past there used to be an option to specify the start protocol as IEC, however that seems to be removed?

Attached is the screen I'm seeing when trying to add a new device.

Am I missing something?

Thanks