Hi!

When reading association view with GuruX.DLMS version 9.0.2411.2201, the list of attributes and methods where empty like this (for the clock object, but it applies to other objects as well):

<GXDLMSObject xsi:type="GXDLMSClock">
<Version>0</Version>
<ShortName>20224</ShortName>
<LogicalName>0.0.1.0.0.255</LogicalName>
<Description>Ch. 0 Clock object #1</Description>
<Attributes />
<Methods />
</GXDLMSObject>

Dear kurumi,

Hope you are doing well.

Excited to become on forum after long time it's around 2.5 years.

I am developing indian standard and for that i have implemented firmware upgrade association but gurux gives error on object list downlow.

Error : Index was out of range. Must be non-negative and less than the size of the collection. Parameter Name: Index

Hi

I need to test HLS GMAC authentication for the Landis+Gyr E570 meter model (Client ID: 1). However, High GMAC authentication is not available for the E570 model in Gurux Director.

Hi everyone,

I'm using GXDLMSDirector to connect to a Landis+Gyr E550 meter. The connection is established successfully, and I can read the basic DLMS/OBIS object structure.

However, I'm facing an issue when trying to read the actual parameter values - most attributes return a NoAccess status. As a result, I can't retrieve the data.

I've attempted to switch the authentication level to Low and High, using the commonly known passwords 00000000 and 12345678, but access to these attributes remains blocked.

Hi, Mikko!
Sometimes i get DLMS_ERROR_CODE_FALSE on call
int CGXDLMSClient::GetData(CGXByteBuffer& reply, CGXReplyData& data, CGXReplyData& notify)

I found it int CGXDLMS::GetHdlcData(
bool server,
CGXDLMSSettings& settings,
CGXByteBuffer& reply,
CGXReplyData& data,
unsigned char& frame,
CGXReplyData* notify)

Hi Mikko!

Please help me with the following question.

I am using the standard example from the Gurux.DLMS.Client.Example.python library.

To simplify the example, I added only the reading of the serial number of the meter. And everything works fine.

Next, I enclose the code in the endless loop, so that after each successful connection and reading of the serial number, the script does not terminate, but prompts the user to press the ENTER button to repeat the operation.

And in this case, everything goes well too.