Hi,

HPL 3 Phase meter return some value when i read the
following OBIS Codes

1) Register(0.0.0.1.2.255)
Attribute 3: Scaler: 1 Unit: NoUnit
Attribute 2: 07 E1 03 01 FF 00 00 00 00 01 4A 00

2) Data(0.0.42.0.0.255)
Attribute 2: 48 50 4C 43 54 30 35 58 58 58 30 32 20 20 20 20

Can you please tell me what the value(Attribute 2) stands for and how to convert to proper meaningful value.

Dear sir,

I am trying to write clock object (0.0.1.0.0.255) using GURUX DLMSdirector.
Reading of clock object is right. when reading the tool shows accurate reading i.e. today's date-time.
but when i am trying to write object then it shows the error String was not recognized as a valid DateTime. .
why this happen? how to overcome this error?
is there any other procedure or setting required to write the clock object?
setting in tool menu is Attribute: 2.Type:OctecString.UIType:DateTime.

Dear sir,
I am trying to read and write the tarriff value into the meter. when i am reading the values , there is no problem ..but when i am writing the values the error shown as below. if i am writing value the tool is not sending set command it shows only following error

Hello Gurux,
We are trying to communicate to a electric meter (DLMS supported meter) using serial port, handshaking is working fine from my board to meter(which ensures that conenctions are proper), but with Gurux client code, I am facing issue saying sending failed..

I am using comm.open("/dev/ttyUSB0",false) and this is success, with the same comm connection when it calls comm.InitializeConnection() or comm.GetObjects() this fails with error 252 and I get a error message as

InitializeConnection Failed Data Send Failed.

this is a timebomb....

https://www.utwente.nl/en/news/!/2017/3/313543/electronic-energy-meters…

Dear sir,

I want to transfer total firmware file using Image transfer class using tool..

how to do that ?

Thanks and regards,

The online DLMS<->XML translator on the Gurux web site uses an XML schema that seems very different from the one in the DLMS specification. Is there a plan to make the translator conformant?

Dear sir,

i want to remotely connect and disconnect device...for that i use Disconnect control interface class .....
so which changes are required in XDLMS director to send the command for "ACTION" for specific methods....

Thanks in advance

Dear sir,

i want to transfer association objects in no of blocks but the XDLMSDirector doesn't send the next block command ..
what is the problem?
which changes are required?

Hi!

Anyone else here who've received the TemporaryFailure error code from a DLMS meter?

I'm getting it while requesting day_profile_table_passive from the Activity Calendar class.

Starting to think that it might be a meter bug but I thought I'd check if someone else has experienced and perhaps knows why it happens?